- % SALE %
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality & Flow
- Modbus | Wireless Modbus
- PowerIO®
- EtherCAT P
- Accessory
Description
Sleeve sensor / cable temperature sensor
THERMASGARD® HTF 200
The THERMASGARD® HTF sleeve/cable temperature measuring transducer serves to detect temperatures in liquid and gaseous media. It can be used as a duct temperature transmitter and - if installed in a thermowell - as an immersion and screw-in device.
The sleeve length varies, depending on request, from 30 to 500 mm (standard is 50 mm or 200 mm), and the cable length can be freely chosen (standard is 1.5 m). Depending on the application, the sensor device is supplied with silicone, glass fibre or PVC leads for two-wire, three-wire or four-wire connection.
Technical details
Process connection
using immersion sleeves THE or
mounting flange, plastic
(optionally in galvanised steel)
mounting flange, plastic
(optionally in galvanised steel)
Insulating resistance
100 MΩ,
at +20 °C (500V DC)
at +20 °C (500V DC)
Permissible air humidity
< 95 % RH, non-precipitating air
Sensor
NTC10kOhm
Connection type
2-wire connection
Testing current
< 2.0 mW
Measuring range
–50...+180 °C Silicone, SiHF, 2 x 0.25 mm²
ends stripped with wire end sleeves
ends stripped with wire end sleeves
Sensor protection
stainless steel, 1.4571, V 4A, Ø = 6 mm
HTF 200 NL = 200 mm
(other optional dimensions also available, NL = 30...400 mm)
cable entry stamped (optional rolled)
HTF 200 NL = 200 mm
(other optional dimensions also available, NL = 30...400 mm)
cable entry stamped (optional rolled)
sensor cable
KL = 1.5 m
Protection type
IP 65 (according to EN 60 529)*