Menu
Temperatur
THERMASGARD® MWTF

Mean value temperature sensor / rod sensor

starting at 72,98 €
Price plus 19% VAT plus Shipping
Mean value temperature sensor / rod sensor THERMASGARD® MWTF
Mean-value temperature sensor THERMASGARD® MWTF (rod sensor 0.4...20 m)
with passive output, in an impact-resistant plastic housing with quick-locking screws,
with bendable sensor rod (fully active), protective tube made from copper, plastic-coated,
and anti-kink spring, incl. mounting flange.

Mean-value temperature sensor THERMASGARD® MWTF-SD (rod sensor 3 m / 6 m)
with passive output, in an impact-resistant plastic housing with snap-on lid, with bendable sensor
rod (fully active), protective tube made from reinforced thermoplastic hose and anti-kink spring,
incl. mounting flange.
The sensor is used to detect the mean temperature (mean value) in gaseous media, e.g. in
ventilation and air conditioning ducts over the entire cross section or over a defined length.
Laid along a meandering route, it uniformly detects the surrounding temperature, as a duct
temperature sensor. For proper mounting of the rod, mounting clamps MK-05-M (accessories)
are available.
Technical details
Measuring range
–30...+80 °C
Sleeve
stainless steel, 1.4571, V4A
Sensor
active over the entire length
(averaging)
Rod material
copper sensor tube, plastic-coated,
with spring for buckling protection
Electrical connection
0.14 - 1.5 mm²
via terminal screws on circuit board
Process connection
by mounting flange, plastic
(galvanised steel optional, see accessories)
and mounting clamps MK - 05 - M
Housing dimensions
72 x 64 x 37,8 mm (Tyr 1)
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
Installation
observe minimum bending radius of 35 mm and
permissible vibration load, ½ G
zulässige Luftfeuchte
< 95 % r. H., non-precipitating air
Protection class
III (according to EN 60 730)
Cable connection
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
Protection type
IP 54 (according to EN 60 529) for the MWTF-SD
IP 65 (according to EN 60 529) for the MWTF
Housing tested, TÜV SÜD, report no. 713139052 (Tyr 1)
Housing
plastic, material polyamide,
30 % glass-globe-reinforced,
with quick-locking screws
(slotted/ Phillips head combination),
colour traffic white (similar to RAL 9016),
ambient temperature –20...+80 °C

Accessories