Room motion sensor or presence detector FSBWF-W
temperature Präsenz

Room motion sensor or presence detector KINASGARD® FSBWF-W

Item no. 1401-5120-3000-162
Product group: WG02

Low availability.

Usually ships in 3 to 5 days
253,07 €
301,15 € incl. VAT + shipping
+

Description

Room motion sensor or presence detector KINASGARD® FSBWF-W
Maintenance-free motion sensor/presence detector KINASREG® FSBWF-W with switching output, in in-wall housing, to detect the presence of people and movements (360° / approx. 10 m). The in-wall sensor is mounted in high-quality panel switch programmes, ideally of the brands Gira, Berker, Merten, Jung, Siemens or Busch-Jaeger (using in-wall adapters) either individually or in combination with light switches, socket outlets, etc.
The sensor is used for monitoring and detecting statuses and for motion-dependent control of room functions, e.g. for lowering the temperature of unused rooms. It is used indoors in corridors, offices, residential and business premises as well as industrial and storage halls.
The infrared motion sensor detects movement over an aperture angle of 90° 110° and a perimeter of 360°. The patented lens system with 20 individual lenses results in very small dark areas that are only a few centimetres wide even at a distance of 10 m, thereby reliably detecting small movements.

Technical details

Voltage supply
24 V AC/ DC (± 10 %)
Power consumption
typically < 2.0 VA/ 24 V AC; typically < 1.0 W/ 24 V DC
Output
without/ with motion + presence,
potential-free changeover contact (24 V), 1 A ohmic load
Sensor
infra-red motion sensor
Detection range
perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular
Motion detection
of persons and objects, required temperature difference
between subject and surroundings 5 K
After-running time
adjustable from 4 s to 16 min
Ambient temperature
storage –20...+ 50 °C
operation 0...+ 50 °C
Electrical connection
0.14 - 1.5 mm², using plug terminals
Housing
plastic, colour pure white glossy (similar to RAL 9010)
(other colours are possible on request with colour variants
depending on the respective switch programme)
Installation
in in-wall flush box Ø 55 mm
Humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 20 (according to EN 60 529)
Standards
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU