Menu
Temperatur
THERMASGARD®HTF

Sleeve sensor / cable temperature sensor

starting at 11,68 €
Price plus 19% VAT plus Shipping
THERMASGARD®
The sleeve sensor/ cable sensor THERMASGARD® HTF is used to detect temperatures in liquid and gaseous media. It can be used as a duct sensor and - if installed in an immersion sleeve - as an immersion and screw-in sensor. The sleeve length varies, depending on request, from 30...500 mm (standard is 50 mm or 200 mm), the cable length is arbitrary (standard is 1.5 m). Depending on application, with silicone, glass fibre, or PVC leads, for two-wire, three-wire, or four-wire connection.
The sleeve sensor/ cable sensor THERMASGARD® HTF is used to detect temperatures in liquid and gaseous media. It can be used as a duct sensor and - if installed in an immersion sleeve - as an immersion and screw-in sensor. The sleeve length varies, depending on request, from 30...500 mm (standard is 50 mm or 200 mm), the cable length is arbitrary (standard is 1.5 m). Depending on application, with silicone, glass fibre, or PVC leads, for two-wire, three-wire, or four-wire connection.
Technical details
Process connection
using immersion sleeves THE or
mounting flange, plastic
(optionally in galvanised steel)
Insulating resistance
100 MΩ,
at +20 °C (500V DC)
zulässige Luftfeuchte
< 95 % r. H., non-precipitating air
Sensor protection
stainless steel, 1.4571, V 4A, Ø = 6 mm
HTF 50 NL = 50 mm
(other optional dimensions also available, NL = 30...400 mm)
cable entry stamped (optional rolled)

Accessories