Immersion/ screw-in/ duct temperature measuring transducer THERMASGARD® TM54-I 100mm

Output

Inserted length

output model

Item no. 1101-7152-0029-910

EAN 4251325617886

Product group: WG01

Immersion/ screw-in/ duct temperature measuring transducer THERMASGARD® TM 54

Calibratable THERMASGARD® TM 54 temperature measuring transducer with eight switchable measuring ranges and continuous output, connecting head made of aluminium and straight protective tube. The basic unit can be combined with accessories to provide four different versions, e.g. with a separate thermowell made of stainless steel for especially rugged applications.

The duct temperature transmitter serves to detect temperatures in liquid or gaseous media. It is used in pipes, heating engineering, storage systems, compact district heating stations, warm and cold water systems, oil and lubrication cycle systems, mechanical, apparatus and plant engineering and throughout the industrial sector. The sensor is factory-calibrated and can be fine-tuned to ambient conditions by an expert.

Power consumption

< 1.0 VA/ 24 V AC/ DC; < 0.55 VA/ 24 V DC

Voltage supply

15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V

Working resistance

Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant

Temperature deviation

typically ± 0.2 K at +25 °C

Sensor

Pt1000, DIN EN 60751, class B
(Perfect Sensor Protection)

Connection type

2- or 3-wire connection

Ambient temperature

Measuring transducer –30...+70 °C

Process connection

by means of immersion sleeve or mounting flange
(accessories)

Protective tube

stainless steel, 1.4571, V4A, Ø = 6 mm

Electrical connection

0.2 - 1.5 mm², via push-in terminal

Output

4...20 mA

Permissible air humidity

< 95 % RH, non-precipitating air

Protection class

III (according to EN 60 730)

Protection type

IP 54 (according to EN 60 529) standard
IP 65 (according to EN 60 529) optional

Measuring ranges

multi-range switching with 8 switchable measuring ranges,
(other ranges optional)
T = +150°C
with manual zero point correction (± 10 K)

Cable connection

adjusting screw made of metal (M 20 x 1,5);
optional with cable gland, brass,
nickel-plated (M 20 x 1,5 ; with strain relief, exchangeable,
inner diameter 6 - 12 mm) or
M12 connector according to DIN EN 61076-2-101 (on request)

Connecting head

form B, material aluminium,
colour white aluminium (similar RAL 9006),
ambient temperature –30...+70° C

Standards

CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU

CE - Declaration of Conformity

UKCA declaration of conformity

Catalogue page EN

Operating instructions

CAD data

Tender text