Sleeve sensor / cable temperature sensor THERMASGARD® HTF200 NTC10K PVC 1,5M

Sensor

cable length

Cable material

Inserted length

Protection type

Item no. 1101-6091-5211-110

EAN 4251325605852

Product group: WG03

Sleeve sensor / cable temperature sensor THERMASGARD® HTF 200

The sleeve sensor/ cable sensor THERMASGARD® HTF is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor and - if installed in an immersion sleeve - as an immersion and screw-in sensor.

The sleeve length varies, depending on request, from 30...400 mm (standard is 50 mm respectively 200 mm), the cable length is arbitrary (standard is 1.5 m). Depending on application, with silicone, glass fibre, or PVC leads, for two-wire or four-wire connection. For direct, continuous use in liquids, please use our THE immersion sleeves (see type table).

Process connection

using immersion sleeves THE or
mounting flange, plastic
(optionally in galvanised steel)

Insulating resistance

100 MΩ,
at +68 °F (500V DC)

Permissible air humidity

< 95 % RH, non-precipitating air

Protection class

III (according to EN 60 730)

Sensor

NTC10kOhm

Connection type

2-wire connection

Testing current

< 2.0 mW

Measuring range

-31...+221 °F

Sensor protection

stainless steel, 1.4571, V 4A, Ø = 0.24 in
HTF 200 NL = 8 in
(other optional dimensions also available, NL = 1.18...16 in)
cable entry stamped

Connection cable

PVC, LiYY, 2 x AWG 24

Inserted length

8 in

sensor cable

KL = 5 ft

Protection type

IP 65 (according to EN 60 529)*

Optional

4-wire connection
also with two sensors
extended measuring range limits, depending on connection leads
IP 68 (according to EN 60 529) - Perfect Sensor Protection
IP 54 (according to EN 60 529) - glass fibre
Cable material: PVC, Silicone, PTFE, glass fibre

Operating instructions

Catalogue page EN

CAD data

Tender text