temperature Temperature

Outside temperature sensor / wet room temperature sensor THERMASGARD® ATF1 NTC1,8K

Item no. 1101-1041-2001-000
EAN 4251325600314
Product group: WG03

In Stock

Usually ships in 1 to 3 days
$ 18.77
$ 22,34 incl. sales tax + shipping
+

Description

Outside temperature sensor / wet room temperature sensor THERMASGARD® ATF 1
Outside wall resistance thermometer/ weather sensor THERMASGARD® ATF 1 (internal sensor) with passive output, housing made of impact-resistant plastic and quick-locking screws.
It is used to measure outside temperatures, temperatures in wet room areas, e.g. as an outdoor sensor, weather sensor for installation on outside walls, in cold storage buildings and greenhouses, in halls, in the industrial sector and in agriculture. Installation in outdoor areas preferably at the north side of a building or in a protected place. In cases of direct solar irradiation, we recommend the use of our WS 01 or WS 04 sun protection hood (accessory).

Technical details

Sensor
NTC1,8kOhm
Connection type
2-wire connection
Testing current
< 2.0 mW
Measuring range
–58...+194 °F
Insulating resistance
100 MΩ,
at +68 °F (500V DC)
Electrical connection
AWG 26 - 16
via terminal screws on circuit board
Cable connection
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 0.4 in) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Housing dimensions
2.8 x 2.5 x 1.5 in (Tyr 1)
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 0.4 in
Dimensions
2.8 x 2.5 x 1.5 in (Tyr 1)
Permissible air humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 67 (according to EN 60 529) Housing tested,
TÜV SÜD, Report No. 713139052 (Tyr 1)
Optional
4-wire connection
M12 connector
(male, 5-pin, A-code)
according to DIN EN 61076-2-101