News

06.09.2023

Comprehensive room air monitoring with just one unit: AERASGARD® RFTM-PS-CO2-W

Sometimes less is simply more? We think so too! That's why we have developed a multifunctional room sensor that effectively monitors and controls the entire room climate.
With just one device, you always have humidity, temperature, fine dust and CO2 content of the ambient air in view.
More info about the product

23.08.2023

Real-time communication with EtherCAT P

Industrial automation requires fast and consistent solutions for real-time communication. With our bus-capable transmitters for connection to EtherCAT P, you can also meet these increased demands in the field of sensor technology. 
Our EtherCAT P sensors are used in plant and building automation, in the central energy management of public and private facilities as well as for the acquisition and control of temperature, humidity and pressure parameters in hard-to-reach areas.
To the product overview

19.07.2023

Industrial sensors in robust stainless steel housing

Do you need really robust sensors for industrial use? Your application does not offer a comfortable temperature, no humidity protection, but high UV exposure or dusty air? No problem! Whether pressure, temperature or humidity sensors: S+S Regeltechnik offers you sensor devices with corrosion-, temperature-, UV- and weather-resistant stainless steel covers for every area of application.
To the product overview

18.07.2023

S+S Summer Party 2023

We don't let the little bit of rain get us down....
Our summer party this year was a complete success! 
Good conversations, a fabulous barbecue buffet, super colleagues. Many thanks for that!

05.07.2023

Always keep an eye on humidity and temperature

Sensitive technical rooms, clean room technology, ventilation systems... In all these facilities, explicit attention must be paid to a balanced room climate in order to protect the goods produced or stored in them from contamination or germs.
The calibratable HYGRASGARD® AFF / AFTF surface-mounted humidity and temperature sensor measures the relative humidity and the temperature of the ambient air and converts the measured variables into a standard signal of 0-10 V or 4..20 mA.
More about these products

21.06.2023

Sustainability and better energy efficiency: RHEASREG® and RHEASGARD® airflow monitors

To ensure sustainable and efficient ventilation, precise and reliable flow sensor technology is required. Our new, comprehensive product portfolio of airflow monitors enables professional monitoring and control of flow velocities and volumetric flow in the duct, on fans, control dampers, humidifiers and electric heating coils.
More about these products

07.06.2023

Really good air - thanks to AERASGARD® RCO2-AS room climate sensor

Our AERASGARD® RCO2-AS indoor climate sensor is available as a surface-mounted or table-top device and reliably informs you about the quality of your indoor air thanks to its intuitive traffic light system and optional warning tone. In addition to increasing your well-being, the device contributes significantly to reducing your operating costs - thanks to energy-saving and demand-oriented room ventilation.
More about this product

24.05.2023

Duct sensor for detecting the temperature 

Professional temperature monitoring in ducts requires precise and reliable sensor technology. The THERMASGARD® TM65-Modbus-T3 duct sensor is used to detect temperatures in liquid or gaseous media. In doing so, the transmitter processes temperatures from -50 to +150°C. The innovative Modbus interface enables easy integration into existing building automation.
More about this product

10.05.2023

Surface-mounted sensor for a positive and sustainable indoor climate 

You would like to reduce your operating costs - but still offer your guests and employees a positive and healthy indoor climate? Our surface-mounted sensor AERASGARD® AFTM-LQ-CO2-Modbus enables energy-saving, demand-oriented room ventilation and thus a reduction in running costs. For this purpose, the transmitter records all relevant measured variables: Humidity, temperature, CO2 concentration and air quality (VOC). 
More about this product

25.04.2023

Advantages for employees at S+S

At S+S, people come first. We want to achieve that everyone feels good and we work daily to further strengthen this goal. Our latest successes are impressive: Whether it's a varied, freshly cooked and free lunch, bicycle leasing via Business Bike or a refreshing drink at the start of the barbecue season - we offer our employees more!
And that is not all: View all employee benefits here

04.04.2023

Room Air Monitoring with the Multi-Sensor Modbus AMS

You want to monitor the air quality of a room comprehensively and in detail, taking into account a variety of factors such as temperature, humidity, air pressure, CO2, CO, VOC and/or fine dust content - but you don't want to use several separate sensor devices?
With the Multi-Sensor Modbus AMS from S+S, you get an agile, compact multifunctional device. The multi-sensor is available in six different variants that cover the entire spectrum of all common measured variables in different constellations. 
  More about this product

22.03.2023

Temperature transmitter for industrial applications: THERMASGARD® TM 54

Do you operate industrial plants and want to monitor the flow temperature of your pipelines safely and reliably? Our THERMASGARD® TM 54 temperature transmitter with eight switchable measuring ranges and continuous output is suitable for use in harsh environments such as in machine, apparatus and plant construction, in heating technology, in district heating compact stations, hot and cold water systems and oil/lubrication circuit installations.
More about this product

15.03.2023

Duct air flow monitor with Modbus. For monitoring flow velocity, volume flow and temperature.

Our air flow monitor RHEASGARD® KLGF-Modbus detects non-aggressive, gaseous flows in the duct and can monitor flow velocity from 0.1 to 20 m/s. The RHEASGARD® KLGFVT-Modbus version also detects the volume flow (0 to 200,000 m³/h) as well as the temperature (0 to +50°C). The sensor is optionally supplied with or without display and converts the measuring signal into a Modbus signal.
More about these products

01.03.2023

Linearised Duct Airflow Monitors: RHEASREG® KLGF and KLSW

Professional monitoring and control of air ducts, fans, control dampers, humidifiers and electric heating coils requires precise flow sensor technology. Our new generation of air flow monitors is reliably at your side. 
The product families RHEASGARD® KLGF (with active output) and RHEASREG® KLSW (with switching output) determine the flow velocity from 0.1...20 m/s with high response speed. They are available with or without display, have a linearized output and are also suitable for integration into DDC systems.

More about these products

22.02.2023

Room temperature transducer with Modbus connection

You want to measure your room temperature safely and reliably? Whether residential or office rooms, hotels, conference centres or educational institutions - our room temperature transmitter THERMASGARD® RTM1 is guaranteed to bring a feel-good atmosphere to any room.
More about this product

08.02.2023

HYGRASGARD® KFTF duct humidity and temperature sensor with Modbus connection

Particularly in ventilation, refrigeration, air-conditioning and clean-room technology, as well as in sensitive technical rooms, explicit attention must be paid to a balanced room climate in order to protect the goods produced in them from contamination or germs. The HYGRASGARD® KFTF duct humidity and temperature sensor with Modbus connection measures the relative humidity and temperature of the ambient air and calculates various parameters internally from these measured variables.
More about this product

25.01.2023

Digital humidity & temperature room sensor HYGRASGARD® RFTF with Modbus connection

With the calibratable HYGRASGARD® RFTF room sensor with Modbus connection, you always have your room air in view - for the optimum feel-good climate. The sensor measures the relative humidity and the temperature of your room. Various parameters are calculated internally from these measured variables. Whether in living or working rooms, canteen kitchens, hotel lobbies, warehouses or in the medical sector - with the digital room sensor you give unpleasant air no chance.
More about this product
 

11.01.2023

NEW: Dual pressure sensor PREMASGARD® 722x with AOS (Automatic Output Switching)

Our PREMASGARD® 722x dual pressure sensor is used to measure pressure, differential pressure and volume flow in air filter systems. It is used in clean room or medical technology, in ventilation and air-conditioning ducts or in canteen kitchens in order to be able to act quickly in the event of abnormalities or contamination. Always keep an eye on the failure-free operation and optimum air quality of your ventilation system!
More information about this product! 

21.12.2022

Donation instead of presents!  

Due to the diffucult situation of many people, we have decided not to send Christmas presents to our customers and business partners. Instead, we support local aid organisations for people in need: 

"Freude für Alle" (Joy for All) – a Christmas campaign of the Nürnberger Nachrichten
For 50 years now, the campaign has been supporting people who are socially marginalised and in need - whether due to illness, a disability, unemployment, due to low pension entitlements or for other reasons. A major focus is on children, who suffer particularly from poverty.

"Tafel Nürnberger Land e.V." – Food donations for people in need  
According to the motto "everyone gives what they can", more than 100 small and large companies are involved in the Tafel Nürnberger Land. They collect "surplus", but qualitatively impeccable, saleable food. Direct and uncomplicated help for people who are on the edge of the subsistence level. 

23.11.2022

NEW: CO2 pendulum sensor AERASGARD® RPCO2

Your application requires precise monitoring of the CO2 content? Especially in medical technology, heating, ventilation and air-conditioning technology or even in large greenhouses, constant monitoring of the air quality is indispensable. 

For these applications, we offer a safe, innovative and reliable solution in the form of our AERASGARD® RPCO2 with remote CO2 pendulum sensor. The sensor is available in four configurations: with/without changeover contact as alarm output and in both versions with/without display (LCD). The device is made in Germany and available for immediate delivery. 
To the product

21.06.2022

S+S Regeltechnik has expanded the pressure measuring ranges of its PREMASGARD® transmitters for gaseous and liquid media

S+S Regeltechnik, a European leader in smart sensor technology for facility and plant engineering, has innovated the family of its proven PREMASGARD® SHD pressure measuring transducers. In the SHD/SHD-SD product range, the transmitters are now available for relative pressures up to 40 bar. The measuring ranges of the PREMASGARD® SHD 692 differential pressure transmitter have been expanded to 10 bar.
read more...

10.02.2022

S+S Regeltechnik GmbH acquires Consens GmbH

Consens is a developer of sensors, components, testing technology and systems for humidity, temperature and air quality. The company was founded in 1998 and has 13 employees with its headquarter and production in Thüringen, Germany.
read more...