Showcase humidity and temperature sensor VFTF-I
temperature Temperature
temperature Luftfeuchtigkeit

Showcase humidity and temperature sensor HYGRASGARD® VFTF-I

Item no. 1201-6122-1000-100
EAN 4251325616605
Product group: WG02

In Stock

Usually ships in 1 to 3 days
480,54 €
571,84 € incl. VAT + shipping
+

Description

Showcase humidity and temperature sensor HYGRASGARD® VFF / VFTF
The calibratable HYGRASGARD® VFF / VFTF humidity and temperature transmitter measures the relative humidity and temperature of air. It converts the measurands of humidity and temperature into a standard signal of 0-10 V or 4...20 mA, and is available with/without an optional display. The sensor device supports four switchable temperature ranges. Relative humidity (in % r.H.) is the quotient of water vapour partial pressure divided by the saturation vapour pressure at the respective gas temperature.

The measuring transducer provides precise detection of temperature and humidity. A digital, long-term stable sensor is used as a measuring element for humidity and temperature. The sensor is factory-calibrated and can be fine-tuned to ambient conditions by an expert.
The showcase sensor device is used in non-aggressive, dust-free environments and is specifically designed for installation in ceilings and walls as well as inside showcases or display cabinets in museums, galleries, cinemas, auditoriums or laboratories. The measuring element is contained inside a stainless steel probe, and its low height (approx. 2.5 mm) makes it barely noticeable.

Technical details

Voltage supply
15...36 V DC
depending on working resistance, residual ripple stabilised ± 0.3 V
Measuring range, humidity
0...100 % RH
Data points
elative humidity [% RH], Temperature
Operating range, humidity
0...95 % RH (without dew formation)
Working resistance
Ra (ohm) = (Ub -14 V)/ 0.02 A for I variant
Deviation of humidity
typical ± 2.0 % (20…80 % RH); at + 25 °C, otherwise ± 3.0 %

Output, humidity
4...20 mA
Measuring range, temperature
multi-range switching
with 4 switchable measuring ranges
–35...+35 °C; –35...+75 °C; 0...+50 °C; 0...+80 °C
(output corresponding to 0 -10 V or 4...20 mA)
Operating range, temperature
0...+50 °C
Temperature deviation
typically ± 0.2 K at +25 °C
Output, temperature
4...20 mA
Current consumption
max. 10 mA at 24 V DC
Ambient temperature
storage –5...+60 °C
operation –5...+60 °C
Connection cable
PVC, LiYY, 4 x 0.14 mm²,
KL = approx. 2 m
Electrical connection
2-, 3- or 4-wire connection
0.14 -1.5 mm ² via terminal screws on circuit board
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
sensor cable
PVC, LiYY, 4 x 0.14 mm²,
KL = approx. 2 m
Long-term stability
± 1 % per year
Protection class
III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529) Housing tested,
TÜV SÜD, Report No.713139052 (Tyr 1)
Sensor protection
probe made of stainless steel, V4A (1.4571), pluggable;
sensor head Ø = 17 mm, H = approx. 2.5 mm;
protective sleeve Ø = 10 mm, NL = approx. 25 mm, M10 x 1.0;
with plastic plug connector Ø = approx. 11 mm,
NL = approx. 25 mm,
Cable connection
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Housing dimensions
72 x 64 x 37,8 mm (Tyr 1)
Mounting (sensor)
cut-out Ø = 11 - 15 mm, IL = approx. 50 mm,
lock nut for fixing is included in the scope of delivery.
Standards
CE conformity,
according to EMC directive 2014/ 30/ EU,
according to EN 61326-1, according to EN 61326-2-3