- New
- Sale
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality
- Flow
- Rymaskon
- Modbus | Wireless Modbus
- EtherCAT P
- Accessory
Description
Motion detector, light sensor, humidity and temperature sensor
KINASGARD® DBWF/LF/TF
The KINASGARD® and PHOTASGARD® DBWF / LF / FTF ceiling-installed motion/light measuring sensors serve to detect persons (at distances up to 10 metres), luminous intensity or brightness, relative humidity and temperature. They are used for installation in suspended ceilings.
Fields of application for the DBWF / LF / FTF device include residential room monitoring, automatic switching of lights, control and alarm technology, and motion-dependent control of room functions, e.g. lowering the temperature in unoccupied rooms.
Technical details
Voltage supply
24 V AC/ DC
(half-wave rectification, read the instructions!)
(half-wave rectification, read the instructions!)
Power consumption
< 3.6 VA at 24 V DC
Measuring range, humidity
0...100 % RH
(output corresponding to 0 -10 V)
(output corresponding to 0 -10 V)
Operating range, humidity
10...95 % RH, without formation of dew
Deviation of humidity
typically ± 3.0 % (20...80 % r. H.) at +20 °C, otherwise ± 5.0 %
Output, humidity
0 - 10 V
Measuring range, temperature
0...+ 50 °C
(output corresponding to 0 -10 V or 4... 20 mA or Ohm value)
others upon request!
(output corresponding to 0 -10 V or 4... 20 mA or Ohm value)
others upon request!
Operating range, temperature
0...+50 °C
Temperature deviation
typically ± 0.8 K at +20 °C, under standard conditions
Output, temperature
0 - 10 V
Output
0 -10 V or inverted 10 - 0 V (selectable via DIP switches)
Output, light sensor
0 - 10 V
Output, motion sensor
potential-free changeover contact,
for switching safety extra-low voltage only, up to 1 A
for switching safety extra-low voltage only, up to 1 A
Sensor
infra-red motion sensor, light sensor with diffuser
Detection range
perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular, at an installation height of approx. 3 m
the sensor covers a detection radius (r) of approx. 3.4 m
reach approx. 10 m, circular, at an installation height of approx. 3 m
the sensor covers a detection radius (r) of approx. 3.4 m
Motion detection
of persons and objects, required temperature difference
between subject and surroundings 5 K
between subject and surroundings 5 K
After-running time
adjustable from 4 s to 17 min
Sensor protection
mounted inside ceiling installation housing
Measuring range, light sensor
0...1000 lux / 0...5000 lux (selectable via DIP switches)
Deviation, light sensor
< ± 10 % of final value
(referred to calibration reference source, approx. 5700 K)
(referred to calibration reference source, approx. 5700 K)
Ambient temperature
0...+50 °C
Storage temperature
–20...+50 °C
Installation dimensions
ceiling cutout: Ø 80 mm
installation depth: < 45 mm (incl. connector system)
on-wall protrusion: > 13 mm (motion sensor)
> 20 mm (humidity sensor)
installation depth: < 45 mm (incl. connector system)
on-wall protrusion: > 13 mm (motion sensor)
> 20 mm (humidity sensor)
Electrical connection
0.14 - 1.5 mm²
via terminal screws on circuit board
via terminal screws on circuit board
Housing
steel, white painted
Housing dimensions
cover: Ø 96 mm, height of housing: 30 mm
Temperature drift values
< ± 5 % of final value/ 10 K at +20 °C
Protection class
III (according to EN 60 730)
Protection type
IP 20 (according to EN 60 529)
Standards
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU