temperature Temperature

WIRELESS Immersion/ screw-in/ duct temperature measuring transducer THERMASGARD® TM65-wModbus 50MM LCD

Item no. 1101-723F-4010-000
EAN 4251325628615
Product group: WG01

Low availability.

Usually ships in 3 to 5 days
$ 302.70
$ 360,21 incl. sales tax + shipping
+

Description

Immersion/ screw-in/ duct temperature measuring transducer THERMASGARD® TM 65 - Modbus - T3
W-Modbus is a wireless-based further development of the proven Modbus standard for the wireless connection of Modbus-enabled sensors, controllers and devices. W-Modbus devices communicate via a wireless radio link from LumenRadio - independently of the in-house Wi-Fi and without leaving the proven protocol standards. Thanks to the reliable and interference-resistant wireless network, entire buildings can be networked and the majority of Modbus RTU cables can be replaced.

Patented quality product (immersion sensor patent no. DE 10 2012 017 500.0)
Innovative Modbus sensor with galvanically separated RS485 Modbus interface, selectable bus termination resistance, DIP switch for setting the bus parameters and bus address in current-free state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, with customised programming in the 7-segment range and dot-matrix range). Uses internal diagnostics to detect sensor breakage or sensor short circuit as errors. The error messages can be retrieved via Modbus and are shown on the display. The sensor is factory-calibrated; an environmental precision adjustment by an expert is possible.

Technical details

Voltage supply
24 V AC (± 20 %) and
15…36 V DC
Power consumption
< 1.2 W/ 24 V DC; < 1.8 VA/ 24 V AC
Data points
température [°C] [°F]
Temperature deviation
typically ± 0.4 °F at +77 °F
Sensor
Pt1000, DIN EN 60751, class B
(Perfect Sensor Protection)
Measuring range
-58...+302°F
Zero point offset
± 18 °F
Ambient temperature
Measuring transducer –22 … +158°F
Medium
depending on selected immersion sleeve
Error detection
sensor breakage, sensor short circuit
Bus protocol
Modbus (RTU mode),
address range 0...247 selectable
Signal filtering
0,3 s / 1 s / 10 s
Protective tube
stainless steel, 1.4571, V4A, Ø = 0.24 in
Electrical connection
AWG 24 - 16, via push-in terminal
Communication
W-Modbus (Wireless Modbus with 2.4 GHz ISM)
Permissible air humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529)*
Internal diagnostics
Error 1 at sensor breakage
Error 2 at sensor short circuit
Cable connection
cable gland, plastic
(M 20 x 1.5; with strain relief, exchangeable,
inner diameter 0,3 - 0,5 in) or
M12 connector according to DIN EN 61076-2-101
(optional on request)
Cable gland
M 20 x 1.5; with strain relief, replaceable,
inner diameter 0,3 - 0,5 in
Standards
CE conformity according to Radio Directive 2014 / 53 / EU
Features
Display with illumination, three-line, programmable,
cutout approx. 2.0 x 1.1 in (W x H),
for displaying the actual temperature or
an individually programmable display value

Accessories