- % SALE %
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality & Flow
- Modbus | Wireless Modbus
- PowerIO®
- EtherCAT P
- Accessory
Description
Room temperature controller, climate controller
THERMASREG® RTR-S
Electronic THERMASREG® RTR - S room temperature/climate controller for monitoring or controlling temperatures, with a 0-10 V output for heating and cooling, optionally as continuous climate controller with manual ventilator speed regulation, setpoint adjustment, and LED status indicators.
The controller is used in individual dry rooms heated and/or cooled by radiators, in cooling ceilings, ventilation or air conditioning systems, or as a remote controller for air conditioners e.g. in hotels, offices, or hospitals, or as a room thermostat.
Technical details
Voltage supply
24 V AC/ DC (± 10 %)
Temperature sensor
internal or external (selectable via jumper)
Pt 1000 according to DIN EN 60751, class B
Pt 1000 according to DIN EN 60751, class B
Output
1 x heating, 1 x cooling,
0 - 10 V or 10 - 0 V repluggable, max. 5 mA
0 - 10 V or 10 - 0 V repluggable, max. 5 mA
Neutral zone
internally adjustable via potentiometer,
+1...+5 K (1K factory setting)
+1...+5 K (1K factory setting)
Control mode
PI
Electrical connection
0.14 - 2.5 mm²
via terminal screws on circuit board
via terminal screws on circuit board
Housing
plastic, material ABS,
colour pure white (similar to RAL 9010)
colour pure white (similar to RAL 9010)
Proportional band
internally adjustable via potentiometer
heating +0.5...+3 K (1 K factory setting)
cooling +0.5...+3 K (2 K factory setting)
heating +0.5...+3 K (1 K factory setting)
cooling +0.5...+3 K (2 K factory setting)
Housing dimensions
98 x 98 x 33 mm (Baldur 2)
Control range
+5....+30 °C, adjustable via setpoint potentiometer with numerical scale
or +21 °C (± 8 K), adjustable via setpoint potentiometer with swelling
arrow (central position/ +/ –)
or +21 °C (± 8 K), adjustable via setpoint potentiometer with swelling
arrow (central position/ +/ –)
Permissible air humidity
max. 90 % r. H., non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 30 (according to EN 60 529)
Installation
wall mounting or on in-wall flush box, Ø 55 mm,
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top/ bottom in case of plain on-wall installation
base with 4 holes, for attachment to vertically or
horizontally installed in-wall flush boxes for rear cable entry,
with predetermined breaking point for cable entry
from top/ bottom in case of plain on-wall installation
Standards
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU