Radio bus system KYMASGARD® RFTM- xx-FSE

In Stock.

Usually ships in 1 to 3 days
260,04 €
Price plus Shipping
309,45 € Price plus shipping

Product group: WG02
Radio bus system KYMASGARD® RFTM- xx-FSE
The wireless room sensor devices of the KYMASGARD® 9000 radio bus system are maintenance-free radio transmitters that function without batteries. Power is generated by a solar cell that converts indoor room light into electric energy. If the ambient light is too low for power generation, the sensors can optionally be powered by two AAA batteries (not included).

These sensors serve to detect the indoor climate and the setpoint values, and to transmit the recorded values to radio actuators and radio signal receivers/gateways by means of radio signals. The following device configurations are available:

KYMASGARD® RFTM-FSE for measuring room temperature and room humidity.

KYMASGARD® RFTM-FSE-ST for measuring room temperature and humidity, and for displaying and setting the temperature setpoint on site using touch buttons.

KYMASGARD® RFTM-LQ-FSE for measuring room temperature, room humidity and air quality (VOC = Volatile Organic Compounds).

KYMASGARD® RFTM-BW-FSE for measuring room temperature and room humidity, and for detecting the movement (or presence) of persons.
Optional accessories include a WH-3100 wall holder as well as a SH-3110 stand for using the devices as table-top units.
Technical details
Operating range, humidity
0...100 % r. H.
Deviation of humidity
typical ± 2.0 % r. H. (20…80 % r. H. ); at + 25 °C, otherwise ± 3.0 % r. H.
Operating range, temperature
0...+40 °C
Temperature deviation
typically ± 0.2 K at +25 °C
Energy generation by solar cell,
batteryless, maintenance-free (optionally battery-operated)
Radio technology
EnOcean protocol, modulation ASK, 868 MHz,
transmission power max. 10 mW, telegram type 4BS
1 temperature, 1 humidity, 1 setpoint,
1 air quality (VOC), 1 motion/presence
Radio transmitter module
EnOcean Dolphin
Measurand acquisition
adjustable, every 1s/ 10 s/ 100 s
Transmission interval
adjustable, typically every 100 seconds,
or at any measuring value change,
status telegram approximately every 16 minutes
Range of coverage
indoors typically 30 - 100 m, outdoors up to 300 m
Ambient temperature
–5...+55 °C
Storage temperature
–25...+60 °C
plastic, material ABS,
colour pure white (similar to RAL 9010)
Ø 88 mm, height 18 mm
Wall-mounted or free-standing using accessories
Permissible air humidity
0…90 % r.H., non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 30 (according to EN 60 529)
CE conformity according to EMC directive 2014/ 30/ EU
and according to Ramp;TTE directive 2014/ 53/ EU