Outdoor motion sensor ABWF-W
temperature Präsenz

Outdoor motion sensor KINASGARD® ABWF-W

Item no. 1401-1110-4000-000
EAN 4251325612874
Product group: WG01

In Stock

Usually ships in 1 to 3 days
133,71 €
159,11 € incl. VAT + shipping
+

Description

Outdoor motion sensor KINASGARD® ABWF
The KINASGARD® ABWF motion/presence transmitter detects the presence of persons and movements. It serves to monitor and detect status conditions and to control motion-dependent room functions, e.g. as a motion detector for lowering the temperature of unoccupied rooms.
The motion sensor device is used in corridors, outdoor areas, industrial halls, offices, residential and commercial premises. The sensor detects movements over an aperture angle of 110° and a perimetre of 360°.


The patented lens system with 20 individual lenses results in very small dark areas of only a few centimetres in width even at a distance of 10 m, thereby reliably detecting small movements. The sensor recognises changes in the infra-red radiation spectrum, i.e. heat radiation, resulting from the movement of persons or objects. Such movements generate a temporary change of the temperature gradient in the field. Due to the constant presence of body (heat) radiation, this sensor device is ideally suitable for detecting persons. The temperature difference between sensor and object must be >5 K.

Technical details

Voltage supply
24 V AC (± 20 %) and
15…36 V DC
Power consumption
< 1 W at 24 V DC; < 2 VA at 24 V AC
Output
without/ with motion + presence,
potential-free changeover contact (24 V), 1 A ohmic load
Sensor
infra-red motion sensor
Detection range
perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular
Motion detection
perimeter 360°, aperture angle 90°/ 110°,
reach approx. 10 m, circular
After-running time
adjustable from 4 s to 16 min
Ambient temperature
–10...+50 °C
Electrical connection
0.14 - 1.5 mm²
via terminal screws on circuit board
Cable connection
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
Housing dimensions
72 x 64 x 37,8 mm (Tyr 1)
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
Dimensions
72 x 64 x 37,8 mm (Tyr 1)
Installation
on-wall
Protection class
III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529)*
Standards
CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU