- % SALE %
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality & Flow
- Modbus | Wireless Modbus
- PowerIO®
- EtherCAT P
- Accessory
Description
Multifunctional outside radio sensor
KYMASGARD® AFTF-HK-FSE
The multifunctional KYMASGARD® AFTF-HK-FSE outside sensor device is a maintenance-free radio transmitter without battery for on-wall installation. Power is generated by converting a solar cell that converts outdoor light into electric energy.
The wireless transmitter serves to detect outside temperature, outside humidity and outdoor light intensity. It sends these measurands via radio signal to radio actuators and radio receivers/gateways.
Technical details
Operating range, humidity
0...100 % RH
Deviation of humidity
typical ± 2.0 % (20…80 % RH); at + 25 °C, otherwise ± 3.0 %
Operating range, temperature
–25...+40 °C
Temperature deviation
typically ± 0.2 K at +25 °C
Light intensity operating range
Multi-range switching 0...1000 Lux / 10...100 kLux
Deviation in light intensity
typically ± 50 Lux (at 0...1000 Lux) / ± 250 Lux (at 10...100 kLux)
Operation
Energy generation by solar cell,
batteryless, maintenance-free (optionally battery-operated)
batteryless, maintenance-free (optionally battery-operated)
Radio technology
EnOcean protocol, modulation ASK, 868 MHz,
transmission power max. 10 mW, telegram type 4BS
transmission power max. 10 mW, telegram type 4BS
Channels
1 Temperature, 1 Humidity, 1 Light Intensity
Radio transmitter module
EnOcean Dolphin
Measurand acquisition
adjustable, every 1s/ 10 s/ 100 s
Range of coverage
indoors typically 30 - 100 m, outdoors up to 300 m
Ambient temperature
–25...+60 °C
Transmission interval
adjustable, typically every 100 seconds,
or at any measuring value change,
status telegram approximately every 16 minutes
or at any measuring value change,
status telegram approximately every 16 minutes
Storage temperature
–25...+60 °C
Protective tube
stainless steel V2A (1.4301), Ø 16 mm, NL = 55 mm
Sensor protection
plastic sinter filter, Ø 16 mm, L = 35 mm, exchangeable
(optional metal sinter filter, Ø 16 mm, L = 32 mm)
(optional metal sinter filter, Ø 16 mm, L = 32 mm)
Housing dimensions
72 x 64 x 43.3 mm (Tyr 1 with Display)
Permissible air humidity
0…90 % r.H., non-precipitating air
Protection class
III (according to EN 60 730)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016),
housing cover for display is transparent !
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016),
housing cover for display is transparent !
Protection type
IP 65 (according to EN 60 529) Housing tested,
TÜV SÜD, Report No.713139052 (Tyr 1)
TÜV SÜD, Report No.713139052 (Tyr 1)
Standards
CE conformity according to EMC directive 2014/ 30/ EU
and according to R&TTE directive 2014/ 53/ EU
and according to R&TTE directive 2014/ 53/ EU