- % SALE %
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality & Flow
- Modbus | Wireless Modbus
- PowerIO®
- EtherCAT P
- Accessory
Description
Mean value temperature measuring transducer
THERMASGARD® MWTM - EtherCAT P
Interconnective THERMASGARD® MWTM - EtherCATP mean value temperature measuring transducer with M8 plug-in connector (EtherCATP-encoded), Bluetooth-enabled, in an impact resistant plastic housing with quick-locking screws, optionally with/without display and bar graph, with a bendable sensor rod (0.4...20 m, fully active) in a robust plastic-coated protective copper tube, incl. mounting flange.
The rod sensor serves to detect the mean temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or on a defined length (laid along a meandering route, it uniformly detects the surrounding temperature). For proper mounting of the rod, MK-05-M mounting clamps MK-05-M are available as accessory. The sensor device is factory-calibrated.
The rod sensor serves to detect the mean temperature (mean value) in gaseous media. It is used in ventilation and air conditioning ducts over the entire cross-section or on a defined length (laid along a meandering route, it uniformly detects the surrounding temperature). For proper mounting of the rod, MK-05-M mounting clamps MK-05-M are available as accessory. The sensor device is factory-calibrated.
EtherCATP-enabled measuring transducer for industrial requirements with maximum reliability: includes easy PLC integration using the devices ESI configuration file, diagnostics (such as communication failure counter), advanced setting options, access to historical data (min/max) and sensor service interval determination. Optionally with large back-lit three-line display (customised programming in the 7-segment and dot-matrix ranges and bar graph (7-digit, LEDs freely configurable) for graphical display, e.g. as a traffic light indicator.
Technical details
Voltage supply
24VDC via EtherCATP (US)
Power consumption
< 3 W
Temperature deviation
typically ± 0.2 K at +25 °C
Radio technology
Bluetooth (LE)
Sensor
Pt1000, DIN EN 60751, class B
Sensor protection
copper sensor tube, plastic-coated,
with spring for buckling protection
with spring for buckling protection
Measuring range
– 50...+ 150 °C; Tmin –50 °C, Tmax + 80 °C
Ambient temperature
Measuring transducer –30...+70 °C
Medium
clean air and
non-aggressive, non-combustible gases
non-aggressive, non-combustible gases
Process connection
by mounting flange, plastic
(included in the scope of delivery)
(included in the scope of delivery)
Probe
active along the entire sensor length
Cable connection
M8 plug-in connector, EtherCATP-encoded
Installation
Bending radius > 35 mm
admissible vibration load ½ g
admissible tensile load < 480N
admissible vibration load ½ g
admissible tensile load < 480N
Dimensions
126 x 90 x 50 mm (Tyr 2)
Permissible air humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 54 (according to EN 60 529) when built-in
Standards
CE conformity, according to EMC Directive 2014/ 30/ EU,
according to RED 2014/ 53/ EU
according to RED 2014/ 53/ EU