Line termination device with terminating resistor MODKON® LA-Modbus

Item no. 1906-1300-0000-100

EAN 4251325623511

Product group: WG02

Line termination device with terminating resistor MODKON® LA- Modbus

MODKON® LA-Modbus T3 line termination device with terminating resistor, in an impact resistant plastic housing with quick-locking screws.

The Modbus device serves as an active bus termination for RS485 networks (ANSI TIA/ EIA-485), such as Modbus RTU. It includes a terminating resistor with a biasing network, which pre-defines the bus signals to a safe value (fail-safe biasing) during bus idle time.

The bus termination can be fully switched on or off via DIP switches. This allows various operating scenarios to be tested in a simple manner whenever servicing is needed.

For very long network cables, both end points can also be provided with an active bus termination to improve interference immunity under harsh environmental conditions.

Voltage supply

24 V AC (± 20 %) and
15…36 V DC

Power consumption

< 0.5 W/ 24 V DC;
< 0.5 VA/ 24 V AC

Operating mode indicator

Status LED PWR ON
(supply voltage)

Ambient temperature

–30...+70 °C

Electrical connection

0.2 - 1.5 mm², via push-in terminal

Housing dimensions

108 x 78.5 x 43.3 mm (Tyr 3 without display)

Cable connection

Cable gland, plastic (2x M 20 x 1.5;
with strain relief, exchangeable, inner diameter 8 - 13 mm)

Permissible air humidity

< 95 % RH, non-precipitating air

Housing

plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)

Protection class

III (according to EN 60 730)

Protection type

IP 65 (according to EN 60 529)*

Standards

CE conformity,
electromagnetic compatibility according to EN 61326,
according to EMC Directive 2014/ 30/ EU

Operating instructions

Catalogue page EN

CAD data

Tender text