{"title":"Modbus humidity sensors","description":"","products":[{"product_id":"aufputz-feuchte-und-temperaturfuehler-hygrasgard-aftf-modbus-t3-modbus-rtu-1201-12c6-1000-000","title":"HYGRASGARD® AFTF-Modbus-T3","description":"Calibratable outdoor humidity and temperature sensor HYGRASGARD® AFTF - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), for precise measurement\u003cbr\u003e of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e The surface-mounted sensor is used in non-aggressive, dust-free environments. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results.\u003cbr\u003e The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display,\u003cbr\u003e two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255189438795,"sku":"1201-12C6-1000-000","price":232.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/AFTF-Modbus__tyr3-K_maxi-mL_4c.png?v=1769648203"},{"product_id":"aufputz-feuchte-und-temperaturfuehler-hygrasgard-aftf-modbus-t3-lcd-modbus-rtu-display-1201-12c6-1400-000","title":"HYGRASGARD® AFTF-Modbus-T3 LCD","description":"Calibratable outdoor humidity and temperature sensor HYGRASGARD® AFTF - Modbus - T3, with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), for precise measurement\u003cbr\u003e of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e The surface-mounted sensor is used in non-aggressive, dust-free environments. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results.\u003cbr\u003e The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display,\u003cbr\u003e two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255189668171,"sku":"1201-12C6-1400-000","price":293.6,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/AFTF-Modbus-Display__tyr3-K_maxi-mL_4c.png?v=1769648161"},{"product_id":"aufputz-feuchte-und-temperaturfuehler-hygrasgard-aftf-sd-modbus-modbus-rtu-1201-1226-1000-100","title":"HYGRASGARD® AFTF-SD-Modbus","description":"Quality product for the HVAC sector, accuracy ± 2 % \u003cbr\u003eCalibratable outdoor humidity and temperature sensor HYGRASGARD® AFTF - SD - Modbus with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display.\u003cbr\u003e\u003cbr\u003e The universal surface-mounted sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (neglecting the atmospheric air pressure) and ambient temperature [°C]. \u003cbr\u003eIt is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255190815051,"sku":"1201-1226-1000-100","price":226.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/AFTF-SD-Modbus__tyr1-Y-K_maxi-mL_4c.png?v=1769648254"},{"product_id":"aufputz-feuchte-und-temperaturfuehler-hygrasgard-aftf-sd-modbus-lcd-modbus-rtu-display-1201-1226-1200-100","title":"HYGRASGARD® AFTF-SD-Modbus LCD","description":"Quality product for the HVAC sector, accuracy ± 2 % \u003cbr\u003eCalibratable outdoor humidity and temperature sensor HYGRASGARD® AFTF - SD - Modbus with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display.\u003cbr\u003e\u003cbr\u003e The universal surface-mounted sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (neglecting the atmospheric air pressure) and ambient temperature [°C]. \u003cbr\u003eIt is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255191142731,"sku":"1201-1226-1200-100","price":282.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/AFTF-SD-Modbus-Display__tyr1-Y-K_maxi-mL_4c.png?v=1769648242"},{"product_id":"taupunktwaechter-hygrasgard-tw-modbus-ip65-modbus-kabelverschraubung-1201-1211-3001-020","title":"HYGRASGARD® TW-Modbus","description":"Quality product for the HVAC sector, accuracy ± 2 % \u003cbr\u003eCalibratable dew point monitor HYGRASGARD® TW - Modbus incl. clamping band\/with remote sensor head, with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display.\u003cbr\u003e\u003cbr\u003eThe universal contact sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (neglecting the atmospheric air pressure) and ambient temperature [°C].\u003cbr\u003eIt is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255200579915,"sku":"1201-1211-3001-020","price":204.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus__tyr1-Y_maxi-mL_4c.png?v=1762962864"},{"product_id":"taupunktwaechter-hygrasgard-tw-modbus-lcd-ip65-modbus-display-kabelverschraubung-1201-1211-3201-020","title":"HYGRASGARD® TW-Modbus LCD","description":"Quality product for the HVAC sector, accuracy ± 2 % \u003cbr\u003eCalibratable dew point monitor HYGRASGARD® TW - Modbus incl. clamping band\/with remote sensor head, with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display.\u003cbr\u003e\u003cbr\u003eThe universal contact sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (neglecting the atmospheric air pressure) and ambient temperature [°C].\u003cbr\u003eIt is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255200809291,"sku":"1201-1211-3201-020","price":260.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus-Display__tyr1-Y_maxi-mL_4c.png?v=1762962896"},{"product_id":"taupunktwaechter-hygrasgard-tw-modbus-extern-ip65-modbus-kabelverschraubung-1201-1211-3001-030","title":"HYGRASGARD® TW-Modbus external","description":"Quality product for the HVAC sector, accuracy ± 2 % \u003cbr\u003eCalibratable dew point monitor HYGRASGARD® TW - Modbus incl. clamping band\/with remote sensor head, with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display.\u003cbr\u003e\u003cbr\u003eThe universal contact sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (neglecting the atmospheric air pressure) and ambient temperature [°C].\u003cbr\u003eIt is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255201038667,"sku":"1201-1211-3001-030","price":223.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus-extern__tyr1-Y_maxi-mL_4c.png?v=1762962807"},{"product_id":"taupunktwaechter-hygrasgard-tw-modbus-extern-lcd-ip65-modbus-display-kabelverschraubung-1201-1211-3201-030","title":"HYGRASGARD® TW-Modbus external LCD","description":"Quality product for the HVAC sector, accuracy ± 2 % \u003cbr\u003eCalibratable dew point monitor HYGRASGARD® TW - Modbus incl. clamping band\/with remote sensor head, with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display.\u003cbr\u003e\u003cbr\u003eThe universal contact sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (neglecting the atmospheric air pressure) and ambient temperature [°C].\u003cbr\u003eIt is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255201202507,"sku":"1201-1211-3201-030","price":264.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus-extern-Display__tyr1-Y_maxi-mL_4c.png?v=1762962838"},{"product_id":"taupunktwaechter-hygrasgard-tw-modbus-t3-ip65-modbus-rtu-kabelverschraubung-1201-1281-3001-020","title":"HYGRASGARD® TW-Modbus-T3","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255201399115,"sku":"1201-1281-3001-020","price":210.14,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus__tyr3_maxi-mL_4c.png?v=1762962934"},{"product_id":"taupunktwaechter-hygrasgard-tw-extern-modbus-t3-ip65-modbus-rtu-kabelverschraubung-1201-1281-3001-030","title":"HYGRASGARD® TW-external-Modbus-T3","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255201792331,"sku":"1201-1281-3001-030","price":229.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus-extern__tyr3_maxi-mL_4c.png?v=1762962715"},{"product_id":"taupunktwaechter-hygrasgard-tw-modbus-t3-lcd-ip65-modbus-rtu-display-kabelverschraubung-1201-1281-3401-020","title":"HYGRASGARD® TW-Modbus-T3 LCD","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255202218315,"sku":"1201-1281-3401-020","price":270.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus-Display__tyr3_maxi-mL_4c.png?v=1762962990"},{"product_id":"taupunktwaechter-hygrasgard-tw-extern-modbus-t3-lcd-ip65-modbus-rtu-display-kabelverschraubung-1201-1281-3401-030","title":"HYGRASGARD® TW-extern-Modbus-T3 LCD","description":"Patented quality product\u003cbr\u003e (prodynamic transverse convection patent no. DE 10 2012 015 726.6)\u003cbr\u003e\u003cbr\u003e Calibratable dew point monitor HYGRASGARD® TW - Modbus - T3 (compact version incl. tensioning strap) or TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display. TW - Modbus - external (remote version), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Condensation in particular is reliably determined thanks to its patented measuring method, prodynamic transverse convection (no conductivity measurement). International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The contact sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255202971979,"sku":"1201-1281-3401-030","price":274.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TW-Modbus-extern-Display__tyr3_maxi-mL_4c.png?v=1762962751"},{"product_id":"deckeneinbau-feuchte-und-temperaturfuehler-hygrasgard-dftf-modbus-modbus-rtu-1201-6136-1000-100","title":"HYGRASGARD® DFTF-Modbus","description":"The calibratable humidity and temperature sensor HYGRASGARD® DFTF - Modbus measures the relative humidity and temperature of the air.\u003cbr\u003e\u003cbr\u003eThe relative humidity (in % RH) is the quotient of the water vapor partial pressure and the saturation vapor pressure at the respective gas temperature. The measuring transducer is designed for the exact recording of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe recessed ceiling sensor is used in non-aggressive, dust-free environments and is used for installation in false ceilings in corridors, offices and residential and commercial premises. The connection head is pluggable for quick and easy installation.  The measuring transducer is located in a separate housing.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255213818187,"sku":"1201-6136-1000-100","price":456.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/DFTF-Modbus__tyr1-Y_pvc-4L_maxi-mL_4c.png?v=1769653635"},{"product_id":"deckeneinbau-feuchte-und-temperaturfuehler-hygrasgard-dftf-modbus-lcd-modbus-rtu-display-1201-6136-1200-100","title":"HYGRASGARD® DFTF-Modbus LCD","description":"The calibratable humidity and temperature sensor HYGRASGARD® DFTF - Modbus measures the relative humidity and temperature of the air.\u003cbr\u003e\u003cbr\u003eThe relative humidity (in % RH) is the quotient of the water vapor partial pressure and the saturation vapor pressure at the respective gas temperature. The measuring transducer is designed for the exact recording of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe recessed ceiling sensor is used in non-aggressive, dust-free environments and is used for installation in false ceilings in corridors, offices and residential and commercial premises. The connection head is pluggable for quick and easy installation.  The measuring transducer is located in a separate housing.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255214211403,"sku":"1201-6136-1200-100","price":477.47,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/DFTF-Modbus-Display__tyr1-Y_pvc-4L_maxi-mL_4c.png?v=1769653617"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-modbus-modbus-1201-1276-1000-000","title":"HYGRASGARD® RPFTF-Modbus","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 %Calibratable room humidity and temperature sensor HYGRASGARD® RPFTF - Modbus (± 2 % ) or RPFTF - 20 - Modbus (± 1.8 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal room pendulum sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atmospheric air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255219749195,"sku":"1201-1276-1000-000","price":317.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus__tyr1-Y-K_maxi-mL_4c.png?v=1762920384"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-modbus-lcd-modbus-display-1201-1276-1200-000","title":"HYGRASGARD® RPFTF-Modbus LCD","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 %Calibratable room humidity and temperature sensor HYGRASGARD® RPFTF - Modbus (± 2 % ) or RPFTF - 20 - Modbus (± 1.8 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal room pendulum sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atm. air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255220437323,"sku":"1201-1276-1200-000","price":372.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus-Display__tyr1-Y-K_maxi-mL_4c.png?v=1762920367"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-20-modbus-modbus-1201-1276-1000-101","title":"HYGRASGARD® RPFTF-20-Modbus","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 %Calibratable room humidity and temperature sensor HYGRASGARD® RPFTF - Modbus (± 2 % ) or RPFTF - 20 - Modbus (± 1.8 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal room pendulum sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atmospheric air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255221158219,"sku":"1201-1276-1000-101","price":380.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus__tyr1-Y-K_maxi-mL_4c_f7f0fcfc-6bb4-47e4-b605-a2b1dc1c110f.png?v=1762920232"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-20-modbus-lcd-modbus-display-1201-1276-1200-101","title":"HYGRASGARD® RPFTF-20-Modbus LCD","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 %Calibratable room humidity and temperature sensor HYGRASGARD® RPFTF - Modbus (± 2 % ) or RPFTF - 20 - Modbus (± 1.8 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal room pendulum sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atm. air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255221420363,"sku":"1201-1276-1200-101","price":435.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus-Display__tyr1-Y-K_maxi-mL_4c_5aa9c82a-60d2-4d7b-940c-1c58c4a3250a.png?v=1762920215"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-modbus-t3-modbus-rtu-1201-6246-1000-000","title":"HYGRASGARD® RPFTF-Modbus-T3","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255221584203,"sku":"1201-6246-1000-000","price":326.94,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus__tyr3-K_maxi-mL_4c.png?v=1762920435"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-20-modbus-t3-modbus-rtu-1201-6246-1000-001","title":"HYGRASGARD® RPFTF-20-Modbus-T3","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255221682507,"sku":"1201-6246-1000-001","price":425.68,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus__tyr3-K_maxi-mL_4c_14f6ea22-9ec3-44b1-abfd-5e81724179b6.png?v=1762920283"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-modbus-t3-lcd-modbus-rtu-display-1201-6246-1400-000","title":"HYGRASGARD® RPFTF-Modbus-T3 LCD","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255221879115,"sku":"1201-6246-1400-000","price":420.77,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus-Display__tyr3-K_maxi-mL_4c_75efb7d5-d0b1-46c0-aa44-2b7ec9b58fcb.png?v=1762920419"},{"product_id":"raumpendel-feuchte-und-temperaturfuehler-hygrasgard-rpftf-20-modbus-t3-lcd-modbus-rtu-display-1201-6246-1400-001","title":"HYGRASGARD® RPFTF-20-Modbus-T3 LCD","description":"Calibratable room pendulum humidity and temperature sensor HYGRASGARD® RPFTF - Modbus - T3 (± 2.0 %) or RPFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-locking screws, optionally with\/without display, cable sensor with stainless steel pendulum and plastic sintered filter (replaceable), for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) and for determining various humidity measurement parameters. International unit system SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The pendulum sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atmospheric pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255222206795,"sku":"1201-6246-1400-001","price":486.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RPFTF-Modbus-Display__tyr3-K_maxi-mL_4c.png?v=1762920267"},{"product_id":"vitrinen-feuchte-und-temperaturfuehler-hygrasgard-vftf-modbus-modbus-rtu-1201-6126-1000-100","title":"HYGRASGARD® VFTF-Modbus","description":"Calibratable showcase humidity and temperature sensor HYGRASGARD® VFTF - Modbus with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display. \u003cbr\u003e\u003cbr\u003eThe universal display case sensor is used to determine various humidity measurement technology parameters. \u003cbr\u003eThe relative humidity and the temperature of the ambient air are measured. \u003cbr\u003eVarious parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% RH], absolute \u003cbr\u003ehumidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] \u003cbr\u003e(disregarding atmospheric air pressure) and ambient temperature [°C]. \u003cbr\u003e\u003cbr\u003eThe measuring transducer is designed for the exact recording of temperature and humidity. \u003cbr\u003eA digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible. \u003cbr\u003e\u003cbr\u003eThe display case sensor is used in non-aggressive, dust-free environments and is especially suitable for installation in ceilings, walls, display cases or showcases in museums, galleries, cinemas, auditoriums or laboratories. The measuring element is located in a stainless steel probe and is hardly noticeable due to its very low height (approx. 2.5 mm).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255224664395,"sku":"1201-6126-1000-100","price":546.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/VFTF-Modbus__tyr1-Y_maxi-mL_4c.png?v=1762967096"},{"product_id":"vitrinen-feuchte-und-temperaturfuehler-hygrasgard-vftf-modbus-lcd-modbus-rtu-display-1201-6126-1200-100","title":"HYGRASGARD® VFTF-Modbus LCD","description":"Calibratable showcase humidity and temperature sensor HYGRASGARD® VFTF - Modbus with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-release screws, optionally with\/without display. \u003cbr\u003e\u003cbr\u003eThe universal display case sensor is used to determine various humidity measurement technology parameters. \u003cbr\u003eThe relative humidity and the temperature of the ambient air are measured. \u003cbr\u003eVarious parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% RH], absolute \u003cbr\u003ehumidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] \u003cbr\u003e(disregarding atmospheric air pressure) and ambient temperature [°C]. \u003cbr\u003e\u003cbr\u003eThe measuring transducer is designed for the exact recording of temperature and humidity. \u003cbr\u003eA digital, long-term stable sensor is used as the measuring element for humidity and temperature. Fine adjustment by the user is possible. \u003cbr\u003e\u003cbr\u003eThe display case sensor is used in non-aggressive, dust-free environments and is especially suitable for installation in ceilings, walls, display cases or showcases in museums, galleries, cinemas, auditoriums or laboratories. The measuring element is located in a stainless steel probe and is hardly noticeable due to its very low height (approx. 2.5 mm).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255224861003,"sku":"1201-6126-1200-100","price":603.05,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/VFTF-Modbus-Display__tyr1-Y_maxi-mL_4c.png?v=1762967075"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-modbus-modbus-1201-3216-1000-029","title":"HYGRASGARD® KFTF-Modbus","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 % Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus (± 3 % ) or KFTF - 20 - Modbus (± 2 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal duct sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atmospheric air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255235641675,"sku":"1201-3216-1000-029","price":224.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus__tyr1-Y-PA6-K_maxi-mL_4c.png?v=1769679659"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-modbus-lcd-modbus-display-1201-3216-1200-029","title":"HYGRASGARD® KFTF-Modbus LCD","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 % Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus (± 3 % ) or KFTF - 20 - Modbus (± 2 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal duct sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atmospheric air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255235707211,"sku":"1201-3216-1200-029","price":280.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus-Display__tyr1-Y-PA6-K_maxi-mL_4c_01d749b5-5027-4011-a017-b38d216857f7.png?v=1769679646"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-20-modbus-modbus-1201-3216-1000-030","title":"HYGRASGARD® KFTF-20-Modbus","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 % Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus (± 3 % ) or KFTF - 20 - Modbus (± 2 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal duct sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atmospheric air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255235838283,"sku":"1201-3216-1000-030","price":292.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus__tyr1-Y-PA6-K_maxi-mL_4c_c355f5a7-72fa-4513-8acd-e1961684158c.png?v=1769679362"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-20-modbus-lcd-modbus-display-1201-3216-1200-030","title":"HYGRASGARD® KFTF-20-Modbus LCD","description":"\u003cp\u003eQuality product for HVAC sector, accuracy ± 1.8 % or ± 2 % Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus (± 3 % ) or KFTF - 20 - Modbus (± 2 %), with plastic sintered filter (optional metal sintered filter), with Modbus connection, terminal box housing made of impact-resistant plastic, housing cover with quick-locking screws, optionally with\/without display. The universal duct sensor is used to determine various humidity measurement technology parameters. The relative humidity and the temperature of the ambient air are measured. Various parameters are calculated internally from these measured variables. The following parameters can be queried via Modbus: relative humidity [% r. H.], absolute humidity [g\/ m³], mixing ratio [g\/ kg], dew point temperature [°C], enthalpy [kJ\/ kg] (disregarding the atmospheric air pressure) and ambient temperature [°C]. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, hotels, technical rooms, assembly and conference facilities. The transmitters are designed for the precise measurement of temperature and humidity. A digital, long-term stable sensor is used as the measuring element for humidity and temperature measurement. Fine adjustment by the user is possible. The sensor is suitable for ceiling and duct mounting or for device installation.\u003c\/p\u003e","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255235871051,"sku":"1201-3216-1200-030","price":436.96,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus-Display__tyr1-Y-PA6-K_maxi-mL_4c.png?v=1769679348"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-modbus-t3-modbus-rtu-1201-32c6-1000-029","title":"HYGRASGARD® KFTF-Modbus-T3","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255235936587,"sku":"1201-32C6-1000-029","price":230.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus__tyr3-PA6-K_maxi-mL_4c.png?v=1769679762"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-20-modbus-t3-modbus-rtu-1201-32c6-1000-030","title":"HYGRASGARD® KFTF-20-Modbus-T3","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255236395339,"sku":"1201-32C6-1000-030","price":301.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus__tyr3-PA6-K_maxi-mL_4c_29e39d7a-4368-46cc-874e-4cc553d0492a.png?v=1769679438"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-modbus-t3-lcd-modbus-rtu-display-1201-32c6-1400-029","title":"HYGRASGARD® KFTF-Modbus-T3 LCD","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255236526411,"sku":"1201-32C6-1400-029","price":291.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus-Display__tyr3-PA6-K_maxi-mL_4c_c66e6e5f-73df-4e36-ba6a-344025a6cb02.png?v=1769679735"},{"product_id":"kanal-feuchte-und-temperaturfuehler-hygrasgard-kftf-20-modbus-t3-lcd-modbus-rtu-display-1201-32c6-1400-030","title":"HYGRASGARD® KFTF-20-Modbus-T3 LCD","description":"Calibratable duct humidity and temperature sensor HYGRASGARD® KFTF - Modbus - T3 (± 2.0 %) or KFTF - 20 - Modbus - T3 (± 1.8 %), with Modbus connection, in an impact-resistant plastic housing with quick-release screws, optionally with\/without display, with plastic sintered filter (replaceable), incl. mounting flange, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. Mounting flange included, for precise measurement of relative humidity (0...100 % RH) and temperature (-35...+80 °C) as well as for determining various humidity measurement parameters. International system of units SI (default) can be converted to Imperial (via Modbus).\u003cbr\u003e\u003cbr\u003e The duct sensor is used in non-aggressive, dust-free environments and is suitable for ceiling and duct mounting as well as for device installation. It is used in refrigeration, air conditioning and clean room technology, technical rooms, hotels and conference facilities.\u003cbr\u003e\u003cbr\u003e A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The following parameters are calculated internally from these measured variables and can be called up via the Modbus: relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and ambient temperature.\u003cbr\u003e\u003cbr\u003e Innovative Modbus sensor with galvanically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in de-energized state, internal LEDs for telegram status display, two separate push-in terminals and large three-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory, fine adjustment by a specialist is possible depending on the environment","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255236788555,"sku":"1201-32C6-1400-030","price":454.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/KFTF-Modbus-Display__tyr3-PA6-K_maxi-mL_4c.png?v=1769679408"},{"product_id":"raum-feuchte-temperatur-fuehler-bzw-messumformer-hygrasgard-fsftm-modbus-modbus-1201-9226-1000-162","title":"HYGRASGARD® FSFTM-Modbus","description":"The HYGRASGARD® FSFTM - Modbus room humidity sensor and transducer in a flush-mounted housing, optionally with potentiometer, is used to measure the relative humidity and temperature of the air and to set the setpoint. The following parameters are calculated internally from the measured variables: relative humidity [% r.H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (disregarding the atmospheric air pressure) and room temperature [°C]. The parameters are queried via the Modbus interface. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e A digital, long-term stable sensor is used for humidity and temperature measurement. The relative humidity [% r.H.] is the quotient of the water vapor partial pressure and the saturation vapor pressure at the respective gas temperature. The flush-mounted sensor is installed in high-quality surface switch programs, preferably from Gira, Berker, Merten, Jung, Siemens or Busch-Jaeger (using a flush-mounted adapter, no setpoint adjustment possible), either individually or in combination with light switches, sockets, etc. It is used in non-aggressive applications. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, in interiors such as living rooms, offices, hotels, etc.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255239606603,"sku":"1201-9226-1000-162","price":320.48,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FSFM__maxi_4c_1799faec-2d29-4604-8e8d-3c60d1708b1a.png?v=1769688912"},{"product_id":"raum-feuchte-temperatur-fuehler-bzw-messumformer-hygrasgard-fsftm-modbus-p-modbus-potentiometer-1201-9226-1400-282","title":"HYGRASGARD® FSFTM-Modbus P","description":"The HYGRASGARD® FSFTM - Modbus room humidity sensor and transducer in a flush-mounted housing, optionally with potentiometer, is used to measure the relative humidity and temperature of the air and to set the setpoint. The following parameters are calculated internally from the measured variables: relative humidity [% r.H.], absolute humidity [g\/m³], mixing ratio [g\/kg], dew point temperature [°C], enthalpy [kJ\/kg] (disregarding the atmospheric air pressure) and room temperature [°C]. The parameters are queried via the Modbus interface. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e A digital, long-term stable sensor is used for humidity and temperature measurement. The relative humidity [% r.H.] is the quotient of the water vapor partial pressure and the saturation vapor pressure at the respective gas temperature. The flush-mounted sensor is installed in high-quality surface switch programs, preferably from Gira, Berker, Merten, Jung, Siemens or Busch-Jaeger (using a flush-mounted adapter, no setpoint adjustment possible), either individually or in combination with light switches, sockets, etc. It is used in non-aggressive applications. It is used in non-aggressive, dust-free environments, in refrigeration, air conditioning and clean room technology, in interiors such as living rooms, offices, hotels, etc.","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255239672139,"sku":"1201-9226-1400-282","price":346.65,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FSFTM-Modbus-P__maxi_4c.png?v=1769688925"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-modbus-1201-42b6-6000-000","title":"HYGRASGARD® RFTF-Modbus","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255242916171,"sku":"1201-42B6-6000-000","price":181.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFF-RFTF__baldur2_maxi-mL_4c.png?v=1769689727"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-modbus-1201-42b6-6001-005","title":"HYGRASGARD® RFTF-Modbus P","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243047243,"sku":"1201-42B6-6001-005","price":221.22,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTM-LQ-CO2-Modbus-P__baldur2_maxi-mL_4c.png?v=1769689854"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-d5-modbus-1201-42b6-6012-841","title":"HYGRASGARD® RFTF-Modbus P D5","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243112779,"sku":"1201-42B6-6012-841","price":254.59,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RTF-xx-PD__baldur2_maxi-mL_4c.png?v=1769689810"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-t-modbus-1201-42b6-6047-005","title":"HYGRASGARD® RFTF-Modbus P T","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243211083,"sku":"1201-42B6-6047-005","price":234.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-P-T__baldur2_maxi-mL_4c.png?v=1769689957"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-t-5l-led-modbus-1201-42b6-6051-005","title":"HYGRASGARD® RFTF-Modbus P T 5L","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243407691,"sku":"1201-42B6-6051-005","price":301.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-P-5L__baldur2_maxi-mL_4c.png?v=1769689895"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-5l-led-modbus-1201-42b6-6119-005","title":"HYGRASGARD® RFTF-Modbus P 5L","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243440459,"sku":"1201-42B6-6119-005","price":285.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-P-5L__baldur2_maxi-mL_4c_0abc59bc-ed39-4347-a07e-4f429d2df79c.png?v=1769689770"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-d5-5l-led-modbus-1201-42b6-6120-841","title":"HYGRASGARD® RFTF-Modbus P D5 5L","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243505995,"sku":"1201-42B6-6120-841","price":321.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-P-D5-5L__ba_23F28.png?v=1769689790"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-t-d5-5l-led-modbus-1201-42b6-6121-841","title":"HYGRASGARD® RFTF-Modbus P T D5 5L","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243571531,"sku":"1201-42B6-6121-841","price":337.31,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-T-P-D5-5L__baldur2_maxi-mL.png?v=1769689916"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-lcd-display-modbus-1201-42b6-7000-000","title":"HYGRASGARD® RFTF-Modbus LCD","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243669835,"sku":"1201-42B6-7000-000","price":223.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-Display__baldur2_maxi-mL.png?v=1769689706"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-lcd-display-modbus-1201-42b6-7001-005","title":"HYGRASGARD® RFTF-Modbus P LCD","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243735371,"sku":"1201-42B6-7001-005","price":263.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-Display-P__baldur2_maxi-mL.png?v=1769689833"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-t-lcd-display-modbus-1201-42b6-7047-005","title":"HYGRASGARD® RFTF-Modbus P T LCD","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255243800907,"sku":"1201-42B6-7047-005","price":276.69,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-Display-P-T__baldur2_maxi-mL.png?v=1769689937"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-t-5l-lcd-display-modbus-1201-42b6-7051-005","title":"HYGRASGARD® RFTF-Modbus P T 5L LCD","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection, in an attractive plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole mounting, optionally with\/without display, measures humidity (0...100 % RH) and temperature (0...+50 °C). International system of units SI (default) can be converted to Imperial (via Modbus). The following parameters are calculated internally from the measured variables and can be queried via Modbus:\u003cbr\u003e relative humidity, absolute humidity, mixing ratio, dew point temperature, enthalpy (disregarding atm. air pressure) and temperature.\u003cbr\u003eAvailable as room operating units in various types with operating elements such as setpoint potentiometer (%), rotary switch (5-stage), presence button or five colored LEDs (color and mode configurable) to display the operating status.\u003cbr\u003e\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees exact measurement results.  The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment. Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255244194123,"sku":"1201-42B6-7051-005","price":343.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-Display-P-T-5L__baldur2_maxi-mL.png?v=1769689874"},{"product_id":"raumbedien-feuchte-und-temperatursensor-hygrasgard-rftf-modbus-p-5l-lcd-display-modbus-1201-42b6-7119-005","title":"HYGRASGARD® RFTF-Modbus P 5L LCD","description":"Quality product for the HVAC sector, accuracy ± 2 %The calibratable room sensor HYGRASGARD® RFTF - Modbus with Modbus connection,\u003cbr\u003ein an elegant plastic housing (Baldur 2) with snap-on lid, lower part with 4-hole\u003cbr\u003emounting, optionally with\/without display, measures humidity (0...100 % RH) and\u003cbr\u003etemperature (- 35...+80 °C). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe following parameters\u003cbr\u003eare calculated internally from these measured variables,\u003cbr\u003ewhich can be queried via Modbus: absolute\u003cbr\u003ehumidity, mixing ratio,\u003cbr\u003edew point temperature,\u003cbr\u003eenthalpy (neglecting\u003cbr\u003ethe atm. air pressure). \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eInternational\u003cbr\u003esystem of units\u003cbr\u003eSI (default) can be switched to Imperial (via Modbus). With device variant\u003cbr\u003ewModbus, the W-Modbus (wireless) replaces the RTU cable, the BMS connection is\u003cbr\u003eradio-based via an W-Modbus gateway.\u003cbr\u003eA long-term stable, digital humidity and temperature sensor guarantees precise measurement results.\u003cbr\u003eThe sensor is calibrated at the factory, and fine adjustment by the specialist\u003cbr\u003eis possible depending on the environment\u003cbr\u003e. Modbus sensor with electrically isolated RS485 Modbus interface,\u003cbr\u003eswitchable\u003cbr\u003ebus terminating resistor,\u003cbr\u003eDIP switch for setting the bus parameters and\u003cbr\u003ebus address\u003cbr\u003ein de-energized state, internal LEDs for telegram status display\u003cbr\u003eand two-line\u003cbr\u003edisplay (illuminated, individually programmable in the 7-segment range and dot-matrix range).","brand":"HYGRASGARD","offers":[{"title":"Default Title","offer_id":51255244423499,"sku":"1201-42B6-7119-005","price":327.4,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTF-Modbus-Display-P-5L__baldur2_maxi-mL.png?v=1769689748"},{"product_id":"raumfuehler-fuer-feuchte-temperatur-und-co2-aerasgard-rftm-co2-modbus-modbus-rtu-ohne-potentiometer-1501-61b6-6001-200","title":"AERASGARD® RFTM-CO2-Modbus","description":"Multifunctional room climate sensor AERASGARD® RFTM-LQ-PS-CO2-Modbus (maximum expansion stage) with Modbus connection, in an attractive plastic housing with snap-on cover, lower part with 4-hole mounting, optionally with\/without display, type variant RFTM-CO2-Modbus optionally with\/without setpoint potentiometer. The room sensor is used to measure humidity (0...100 % RH), temperature (0...+50°C), air quality (VOC) (0...100 % ), particulate matter (PM) (0...1000 µg\/m3) and CO2 content (0...5000 ppm) and as a room control unit (% setpoint). International system of units SI (default) can be switched to Imperial (via Modbus). The following parameters can be called up via Modbus: Temperature, relative humidity, air quality (VOC), particulate matter (PM) and carbon dioxide (CO2). The entire indoor climate can be effectively monitored and controlled with just one device. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being. It is used in offices, hotels, conference rooms, apartments, stores, etc. One sensor per 30 m² of room area is recommended. A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The air quality is determined on the basis of a (VOC) mixed gas sensor. The CO2 content of the air is determined using an optical NDIR sensor (non-dispersive infrared technology). An optical fine dust sensor precisely detects particles (PM) in the size category 0.3 to 10 micrometres.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display, two separate push-in terminals and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"AERASGARD","offers":[{"title":"Default Title","offer_id":51255377658187,"sku":"1501-61B6-6001-200","price":354.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFF-RFTF__baldur2_maxi-mL_4c_700a16ec-c0a5-4a9f-ba19-e79b0da8b8dc.png?v=1762857375"},{"product_id":"raumfuehler-fuer-feuchte-temperatur-und-co2-aerasgard-rftm-co2-modbus-lcd-modbus-rtu-display-ohne-potentiometer-1501-61b6-6021-200","title":"AERASGARD® RFTM-CO2-Modbus LCD","description":"Multifunctional room climate sensor AERASGARD® RFTM-LQ-PS-CO2-Modbus (maximum expansion stage) with Modbus connection, in an attractive plastic housing with snap-on cover, lower part with 4-hole mounting, optionally with\/without display, type variant RFTM-CO2-Modbus optionally with\/without setpoint potentiometer. The room sensor is used to measure humidity (0...100 % RH), temperature (0...+50°C), air quality (VOC) (0...100 % ), particulate matter (PM) (0...1000 µg\/m3) and CO2 content (0...5000 ppm) and as a room control unit (% setpoint). International system of units SI (default) can be switched to Imperial (via Modbus). The following parameters can be called up via Modbus: Temperature, relative humidity, air quality (VOC), particulate matter (PM) and carbon dioxide (CO2). The entire indoor climate can be effectively monitored and controlled with just one device. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being. It is used in offices, hotels, conference rooms, apartments, stores, etc. One sensor per 30 m² of room area is recommended. A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The air quality is determined on the basis of a (VOC) mixed gas sensor. The CO2 content of the air is determined using an optical NDIR sensor (non-dispersive infrared technology). An optical fine dust sensor precisely detects particles (PM) in the size category 0.3 to 10 micrometres.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display, two separate push-in terminals and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"AERASGARD","offers":[{"title":"Default Title","offer_id":51255377789259,"sku":"1501-61B6-6021-200","price":409.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RFTM-LQ-CO2-Modbus-Display__baldur2_maxi-mL_4c_8f38cd2b-57ac-4660-9e89-be1dd6015067.png?v=1762857402"},{"product_id":"raumfuehler-fuer-feuchte-temperatur-und-co2-aerasgard-rftm-co2-modbus-p-modbus-rtu-potentiometer-1501-61b6-6501-271","title":"AERASGARD® RFTM-CO2-Modbus P","description":"Multifunctional room climate sensor AERASGARD® RFTM-LQ-PS-CO2-Modbus (maximum expansion stage) with Modbus connection, in an attractive plastic housing with snap-on cover, lower part with 4-hole mounting, optionally with\/without display, type variant RFTM-CO2-Modbus optionally with\/without setpoint potentiometer. The room sensor is used to measure humidity (0...100 % RH), temperature (0...+50°C), air quality (VOC) (0...100 % ), particulate matter (PM) (0...1000 µg\/m3) and CO2 content (0...5000 ppm) and as a room control unit (% setpoint). International system of units SI (default) can be switched to Imperial (via Modbus). The following parameters can be called up via Modbus: Temperature, relative humidity, air quality (VOC), particulate matter (PM) and carbon dioxide (CO2). The entire indoor climate can be effectively monitored and controlled with just one device. This enables energy-saving, needs-based room ventilation and thus a reduction in operating costs and an increase in well-being. It is used in offices, hotels, conference rooms, apartments, stores, etc. One sensor per 30 m² of room area is recommended. A long-term stable, digital humidity and temperature sensor guarantees exact measurement results. The air quality is determined on the basis of a (VOC) mixed gas sensor. The CO2 content of the air is determined using an optical NDIR sensor (non-dispersive infrared technology). An optical fine dust sensor precisely detects particles (PM) in the size category 0.3 to 10 micrometres.\u003cbr\u003e\u003cbr\u003eInnovative Modbus sensor with electrically isolated RS485 Modbus interface, switchable bus terminating resistor, DIP switch for setting the bus parameters and bus address in the de-energized state, internal LEDs for telegram status display, two separate push-in terminals and two-line display (illuminated, individually programmable in the 7-segment range and dot-matrix range). The sensor is calibrated at the factory; fine adjustment by a specialist is possible depending on the environment.","brand":"AERASGARD","offers":[{"title":"Default Title","offer_id":51255378084171,"sku":"1501-61B6-6501-271","price":392.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RTR-S-011__baldur2_maxi-mL_4c_ae6acdf7-094b-4a9b-a683-d11aea1bf433.png?v=1762857420"}],"url":"https:\/\/www.spluss.de\/en\/collections\/modbus-humidity-sensors.oembed?page=13","provider":"S+S Regeltechnik","version":"1.0","type":"link"}