{"title":"Bestsellers","description":"","products":[{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf02-pt1000-ip54-1101-1010-5001-000","title":"THERMASGARD® ALTF02 Pt1000","description":"The THERMASGARD® ALTF 2 is a pipe contact resistance thermometer with passive output, in an impact-resistant plastic housing with quick-locking screws, incl. clamping strap.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe THERMASGARD® ALTF 02 is a low-cost tube contact resistance thermometer with passive output, in an impact-resistant plastic housing with snap-on lid, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  The contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. The sensor uses the surface temperature to determine the temperature of the medium flowing in the pipe (e.g. the water temperature). The pipe sensor is used to measure the temperature of lines, pipes (e.g. cold and hot water) or heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254478209355,"sku":"1101-1010-5001-000","price":23.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-02__tyr01_maxi-mL_4c_d04c0e0c-a541-4cee-893b-86059668b353.png?v=1769760698"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf02-ni1000-ip54-1101-1010-9001-000","title":"THERMASGARD® ALTF02 Ni1000","description":"The THERMASGARD® ALTF 2 is a pipe contact resistance thermometer with passive output, in an impact-resistant plastic housing with quick-locking screws, incl. clamping strap.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe THERMASGARD® ALTF 02 is a low-cost tube contact resistance thermometer with passive output, in an impact-resistant plastic housing with snap-on lid, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  The contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. The sensor uses the surface temperature to determine the temperature of the medium flowing in the pipe (e.g. the water temperature). The pipe sensor is used to measure the temperature of lines, pipes (e.g. cold and hot water) or heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254478438731,"sku":"1101-1010-9001-000","price":24.3,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-02__tyr01_maxi-mL_4c_a0c685c8-f229-43a4-bce8-bbeb30078f17.png?v=1769760537"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf02-nitk-ip54-1101-1011-0001-000","title":"THERMASGARD® ALTF02 NiTK","description":"The THERMASGARD® ALTF 2 is a pipe contact resistance thermometer with passive output, in an impact-resistant plastic housing with quick-locking screws, incl. clamping strap.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe THERMASGARD® ALTF 02 is a low-cost tube contact resistance thermometer with passive output, in an impact-resistant plastic housing with snap-on cover, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  The contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. The sensor uses the surface temperature to determine the temperature of the medium flowing in the pipe (e.g. the water temperature). The pipe sensor is used to measure the temperature of lines, pipes (e.g. cold and hot water) or heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254478700875,"sku":"1101-1011-0001-000","price":27.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-02__tyr01_maxi-mL_4c_7e946a14-e0ae-468f-95a4-e051d151350c.png?v=1769760563"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf2-pt1000-ip65-1101-1020-5001-000","title":"THERMASGARD® ALTF2 Pt1000","description":"The THERMASGARD® ALTF 2 is a pipe contact resistance thermometer with passive output, in an impact-resistant plastic housing with quick-locking screws, incl. clamping strap.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe THERMASGARD® ALTF 02 is a low-cost tube contact resistance thermometer with passive output, in an impact-resistant plastic housing with snap-on lid, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  The contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. The sensor uses the surface temperature to determine the temperature of the medium flowing in the pipe (e.g. the water temperature). The pipe sensor is used to measure the temperature of lines, pipes (e.g. cold and hot water) or heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254481224011,"sku":"1101-1020-5001-000","price":28.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-2__tyr1_maxi-mL_4c_ab869b76-0b69-4e71-a300-da5ffbb3bfb3.png?v=1769761181"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf2-ni1000-ip65-1101-1020-9001-000","title":"THERMASGARD® ALTF2 Ni1000","description":"The THERMASGARD® ALTF 2 is a pipe contact resistance thermometer with passive output, in an impact-resistant plastic housing with quick-locking screws, incl. clamping strap.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe THERMASGARD® ALTF 02 is a low-cost tube contact resistance thermometer with passive output, in an impact-resistant plastic housing with snap-on lid, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  The contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. The sensor uses the surface temperature to determine the temperature of the medium flowing in the pipe (e.g. the water temperature). The pipe sensor is used to measure the temperature of lines, pipes (e.g. cold and hot water) or heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254482207051,"sku":"1101-1020-9001-000","price":28.12,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-2__tyr1_maxi-mL_4c_4f4e889c-4930-4f1c-b6a0-458b5aa25b23.png?v=1769760971"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf2-ntc10k-ip65-1101-1021-5001-000","title":"THERMASGARD® ALTF2 NTC10K","description":"The THERMASGARD® ALTF 2 is a pipe contact resistance thermometer with passive output, in an impact-resistant plastic housing with quick-locking screws, incl. clamping strap.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe THERMASGARD® ALTF 02 is a low-cost tube contact resistance thermometer with passive output, in an impact-resistant plastic housing with snap-on lid, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  The contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. The sensor uses the surface temperature to determine the temperature of the medium flowing in the pipe (e.g. the water temperature). The pipe sensor is used to measure the temperature of lines, pipes (e.g. cold and hot water) or heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254484500811,"sku":"1101-1021-5001-000","price":23.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-2__tyr1_maxi-mL_4c_75808fe4-894c-48f2-a057-4175653b4ef7.png?v=1769761077"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf2-lm235z-ip65-1101-1022-1001-000","title":"THERMASGARD® ALTF2 LM235Z","description":"The THERMASGARD® ALTF 2 is a pipe contact resistance thermometer with passive output, in an impact-resistant plastic housing with quick-locking screws, incl. clamping strap.  \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe THERMASGARD® ALTF 02 is a low-cost tube contact resistance thermometer with passive output, in an impact-resistant plastic housing with snap-on lid, incl. clamping strap. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e  The contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. The sensor uses the surface temperature to determine the temperature of the medium flowing in the pipe (e.g. the water temperature). The pipe sensor is used to measure the temperature of lines, pipes (e.g. cold and hot water) or heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254485680459,"sku":"1101-1022-1001-000","price":27.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-2__tyr1_maxi-mL_4c.png?v=1769760937"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf2-pt100-ip65-1101-1050-1003-000","title":"THERMASGARD® ATF2 Pt100","description":"External wall resistance thermometer\/weather sensor THERMASGARD® ATF 2 (external sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. \u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIn outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the sun and ball protection WS 01 or WS 04 (accessories) or the device variant with mounted sun protection SS 02 (on request) must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254491873611,"sku":"1101-1050-1003-000","price":42.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-2__tyr1_maxi-mL_4c.png?v=1769653085"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf2-pt1000-ip65-1101-1050-5001-000","title":"THERMASGARD® ATF2 Pt1000","description":"External wall resistance thermometer\/weather sensor THERMASGARD® ATF 2 (external sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. \u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIn outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the sun and ball protection WS 01 or WS 04 (accessories) or the device variant with mounted sun protection SS 02 (on request) must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254492528971,"sku":"1101-1050-5001-000","price":42.53,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-2__tyr1_maxi-mL_4c_4d07ea42-0f77-4083-8392-0f79e2880a58.png?v=1769653128"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf2-ni1000-ip65-1101-1050-9001-000","title":"THERMASGARD® ATF2 Ni1000","description":"External wall resistance thermometer\/weather sensor THERMASGARD® ATF 2 (external sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. \u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIn outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the sun and ball protection WS 01 or WS 04 (accessories) or the device variant with mounted sun protection SS 02 (on request) must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254493675851,"sku":"1101-1050-9001-000","price":45.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-2__tyr1_maxi-mL_4c_c20f67b1-ec1e-4285-b5ef-d0d6ada74f27.png?v=1769652875"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf2-ntc10k-ip65-1101-1051-5001-000","title":"THERMASGARD® ATF2 NTC10K","description":"External wall resistance thermometer\/weather sensor THERMASGARD® ATF 2 (external sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. \u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIn outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the sun and ball protection WS 01 or WS 04 (accessories) or the device variant with mounted sun protection SS 02 (on request) must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254495379787,"sku":"1101-1051-5001-000","price":41.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-2__tyr1_maxi-mL_4c_1c492c46-31eb-44ac-bd9c-fb3e77d8fccc.png?v=1769653001"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf01-ni1000-ip54-1101-1030-9001-000","title":"THERMASGARD® ATF01 Ni1000","description":"External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 1 (internal sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 01 (internal sensor) with passive output, with housing made of impact-resistant plastic and snap-on cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. In outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sunshade must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254498033995,"sku":"1101-1030-9001-000","price":20.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-01__tyr01_maxi-mL_4c_1eac94e7-8f24-4c88-b456-c148aa6e2c94.png?v=1769652322"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf01-ntc10k-ip54-1101-1031-5001-000","title":"THERMASGARD® ATF01 NTC10K","description":"External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 1 (internal sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 01 (internal sensor) with passive output, with housing made of impact-resistant plastic and snap-on cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. In outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sunshade must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254499967307,"sku":"1101-1031-5001-000","price":16.03,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-01__tyr01_maxi-mL_4c_06a3f3cf-d797-4578-abea-411124ad456b.png?v=1769652406"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf1-pt1000-ip67-1101-1040-5001-000","title":"THERMASGARD® ATF1 Pt1000","description":"External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 1 (internal sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 01 (internal sensor) with passive output, with housing made of impact-resistant plastic and snap-on cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. In outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sunshade must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254502359371,"sku":"1101-1040-5001-000","price":22.38,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-1__tyr1_maxi-mL_4c_aba37cd7-57b2-4c68-b86e-08d74bab431f.png?v=1769652757"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf1-ni1000-ip67-1101-1040-9001-000","title":"THERMASGARD® ATF1 Ni1000","description":"External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 1 (internal sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 01 (internal sensor) with passive output, with housing made of impact-resistant plastic and snap-on cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. In outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sunshade must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254504390987,"sku":"1101-1040-9001-000","price":21.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-1__tyr1_maxi-mL_4c_72100f2b-58e8-42bd-8514-6da40faeec10.png?v=1769652555"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf1-ntc10k-ip67-1101-1041-5001-000","title":"THERMASGARD® ATF1 NTC10K","description":"External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 1 (internal sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 01 (internal sensor) with passive output, with housing made of impact-resistant plastic and snap-on cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. In outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sunshade must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254506357067,"sku":"1101-1041-5001-000","price":17.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-1__tyr1_maxi-mL_4c_dc23b88e-54d9-41bc-aaf9-4aa14b9a6120.png?v=1769652656"},{"product_id":"aussentemperaturfuehler-feuchtraumtemperaturfuehler-thermasgard-atf1-lm235z-ip67-1101-1042-1001-000","title":"THERMASGARD® ATF1 LM235Z","description":"External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 1 (internal sensor) with passive output, with housing made of impact-resistant plastic and quick-locking screws. External wall resistance thermometer\/ weather sensor THERMASGARD® ATF 01 (internal sensor) with passive output, with housing made of impact-resistant plastic and snap-on cover. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eIt is used to record the outdoor temperature, the temperature in damp areas, e.g. as an outdoor sensor, weather sensor, for mounting on external walls, in cold stores and greenhouses, in halls, in industrial areas and in agriculture. In outdoor areas, the temperature sensor is preferably installed on the north side or in a protected location. In direct sunlight, the WS 01 or WS 04 sunshade must be used.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254507864395,"sku":"1101-1042-1001-000","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ATF-1__tyr1_maxi-mL_4c_6ddbba6d-a418-4aeb-b479-14c4dce8fa40.png?v=1769652521"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf1-pt100-silikon-1-5m-ip65-1101-6020-1211-120","title":"THERMASGARD® ALTF1 Pt100 silicone 1.5M","description":"THERMASGARD® ALTF 1 contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe contact temperature sensor ALTF 1 with connection cable and passive output determines the temperature of the medium flowing in the pipe (e.g. the water temperature) via the surface temperature. The ALTF 1 is a pipe contact resistance thermometer with clamping band and axial sensor tube for temperature measurement on pipes (e.g. cold and hot water) or on heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254509207883,"sku":"1101-6020-1211-120","price":23.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-1__kabel_maxi-mL_4c_1f953fd5-e9b5-4358-baf0-6992c55caef1.png?v=1769760876"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf1-pt1000-pvc-1-5m-ip65-1101-6020-5211-110","title":"THERMASGARD® ALTF1 Pt1000 PVC 1.5M","description":"THERMASGARD® ALTF 1 contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe contact temperature sensor ALTF 1 with connection cable and passive output determines the temperature of the medium flowing in the pipe (e.g. the water temperature) via the surface temperature. The ALTF 1 is a pipe contact resistance thermometer with clamping band and axial sensor tube for temperature measurement on pipes (e.g. cold and hot water) or on heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254510059851,"sku":"1101-6020-5211-110","price":22.34,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-1__kabel_maxi-mL_4c_d341e83b-766f-4b8f-b760-d468f9294e2f.png?v=1769760890"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf1-pt1000-silikon-1-5m-ip65-1101-6020-5211-120","title":"THERMASGARD® ALTF1 Pt1000 silicone 1.5M","description":"THERMASGARD® ALTF 1 contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe contact temperature sensor ALTF 1 with connection cable and passive output determines the temperature of the medium flowing in the pipe (e.g. the water temperature) via the surface temperature. The ALTF 1 is a pipe contact resistance thermometer with clamping band and axial sensor tube for temperature measurement on pipes (e.g. cold and hot water) or on heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254510453067,"sku":"1101-6020-5211-120","price":23.18,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-1__kabel_maxi-mL_4c_d6ce1a08-9b9d-41ae-baaa-b77ef0519af8.png?v=1769760903"},{"product_id":"anlegetemperaturfuehler-rohranlegefuehler-thermasgard-altf1-ntc10k-pvc-1-5m-ip65-1101-6021-5211-110","title":"THERMASGARD® ALTF1 NTC10K PVC 1.5M","description":"THERMASGARD® ALTF 1 contact sensors are electrical contact thermometers that are used to measure the surface temperature of solid bodies and have at least one so-called contact surface or contact area that is brought into contact with the surface to be measured. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe contact temperature sensor ALTF 1 with connection cable and passive output determines the temperature of the medium flowing in the pipe (e.g. the water temperature) via the surface temperature. The ALTF 1 is a pipe contact resistance thermometer with clamping band and axial sensor tube for temperature measurement on pipes (e.g. cold and hot water) or on heating pipes for heating control.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254514188619,"sku":"1101-6021-5211-110","price":22.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ALTF-1__kabel_maxi-mL_4c_cd2e122e-6473-4b6e-8f57-51ac9f45fc5c.png?v=1769760813"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf200-ntc10k-silikon-1-5m-ip65-1101-6091-5211-120","title":"THERMASGARD® HTF200 NTC10K silicone 1.5M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two- or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254519726411,"sku":"1101-6091-5211-120","price":26.7,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-200-MF__rolled-standard_pvc_maxi-mL_4c_a73fd72d-64b1-4f05-b4bc-89ff548fc5e9.png?v=1769675945"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-ni1000-pvc-1-5m-ip65-1101-6030-9211-110","title":"THERMASGARD® HTF50 Ni1000 PVC 1.5M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254525296971,"sku":"1101-6030-9211-110","price":17.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_a766d086-3987-4d12-8314-0fe33cd36645.png?v=1769676355"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-ni1000-pvc-3m-ip65-1101-6030-9231-110","title":"THERMASGARD® HTF50 Ni1000 PVC 3M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254525919563,"sku":"1101-6030-9231-110","price":20.46,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_025b8116-d317-49cc-93f6-5d4417ac37b1.png?v=1769676403"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-ntc1-8k-silikon-5m-ip65-1101-6031-2251-120","title":"THERMASGARD® HTF50 NTC1.8K silicone 5M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254532047179,"sku":"1101-6031-2251-120","price":27.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_b1fc0cb2-82d5-42f6-ab3a-aead4dd15a4b.png?v=1769677033"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-ntc10k-pvc-3m-ip65-1101-6031-5231-110","title":"THERMASGARD® HTF50 NTC10K PVC 3M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254533587275,"sku":"1101-6031-5231-110","price":17.79,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_c641e769-f564-45b3-afa5-cfb6dfe0205f.png?v=1769677131"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-pt100-silikon-10m-ip65-1101-6030-1301-120","title":"THERMASGARD® HTF50 Pt100 silicone 10M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254541451595,"sku":"1101-6030-1301-120","price":45.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_bd4cbd77-d05f-41da-a853-86a9a2e22ea9.png?v=1769677751"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-pt1000-pvc-1-5m-ip65-1101-6030-5211-110","title":"THERMASGARD® HTF50 Pt1000 PVC 1.5M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254541713739,"sku":"1101-6030-5211-110","price":17.78,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_2e1a2542-865b-4e27-af79-658aef2ba5db.png?v=1769677874"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-pt1000-silikon-1-5m-ip65-1101-6030-5211-120","title":"THERMASGARD® HTF50 Pt1000 silicone 1.5M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254541844811,"sku":"1101-6030-5211-120","price":21.85,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_d31d01ea-5ca9-4a47-80bb-2e80edb7d4a5.png?v=1769677996"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-pt1000-pvc-3m-ip65-1101-6030-5231-110","title":"THERMASGARD® HTF50 Pt1000 PVC 3M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass silk or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254542696779,"sku":"1101-6030-5231-110","price":20.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_d4f4add4-df45-4787-a947-f0ed8558460b.png?v=1769677923"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-pt1000-silikon-3m-ip65-1101-6030-5231-120","title":"THERMASGARD® HTF50 Pt1000 silicone 3M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two- or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254542926155,"sku":"1101-6030-5231-120","price":26.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_3f2a6c7a-9665-4e01-af77-fe1192134b3c.png?v=1769678044"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-pt1000-pvc-5m-ip65-1101-6030-5251-110","title":"THERMASGARD® HTF50 Pt1000 PVC 5M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254543122763,"sku":"1101-6030-5251-110","price":25.17,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_e0b33b99-fc0f-4ddc-9f54-0dc216631953.png?v=1769677948"},{"product_id":"huelsenfuehler-kabeltemperaturfuehler-thermasgard-htf50-pt1000-pvc-10m-ip65-1101-6030-5301-110","title":"THERMASGARD® HTF50 Pt1000 PVC 10M","description":"The THERMASGARD® HTF sleeve sensor\/cable sensor is used to measure temperatures in liquid and gaseous media. It can be used as a duct sensor as well as an immersion and screw-in sensor by installing it in a thermowell. \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThe sleeve length varies as required from 30...400 mm (standard is 50 mm or 200 mm), the cable length is freely selectable (standard is 1.5 m). Depending on the application, with silicone, glass fiber or PVC cable, as a two or four-wire connection. For direct, permanent use in liquids, please use our immersion sleeves THE (see type table).","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254544597323,"sku":"1101-6030-5301-110","price":35.74,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/HTF-50__rolled-standard_silicon_maxi-mL_4c_fedeb4d7-3e84-49f2-ba03-35633745c86d.png?v=1769677899"},{"product_id":"einschraubfuehler-tauchtemperaturfuehler-mit-halsrohr-thermasgard-etf7-ni1000-150mm-kabelverschraubung-ip65-1101-2084-2031-000","title":"THERMASGARD® ETF7 Ni1000 150mm","description":"Very fast-response screw-in resistance thermometer\/immersion temperature sensor THERMASGARD® ETF 7 with passive output, stainless steel neck tube and single-tapered thermowell, housing cover with quick-locking screws.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eVery fast response time, especially suitable for very fast temperature or control processes, e.g. in hydraulic systems.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254572777803,"sku":"1101-2084-2031-000","price":177.21,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/ETF-7__tyr1_maxi-mL_4c_bee02688-7654-479f-a264-778d9ab1d7d2.png?v=1769668481"},{"product_id":"einschraubfuehler-tauchtemperaturfuehler-thermasgard-etf6-pt100-100-80-druckschraube-ip54-1101-2070-1023-000","title":"THERMASGARD® ETF6 Pt100 100\/80","description":"Screw-in resistance thermometer\/temperature sensor THERMASGARD® ETF 6 with neck tube, passive output, aluminum connection head and straight protection tube.\u003cbr\u003e\u003cbr\u003eThe duct sensor is used for temperature measurement in liquid or gaseous media. It is used in pipelines, containers or storage tanks - and preferably where pipes or containers need to be insulated.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254576873803,"sku":"1101-2070-1023-000","price":93.42,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RGTF-2__formB-HL_maxi-mL_4c.png?v=1769670237"},{"product_id":"einschraubfuehler-tauchtemperaturfuehler-thermasgard-etf6-pt100-200-80-druckschraube-ip54-1101-2070-1043-000","title":"THERMASGARD® ETF6 Pt100 200\/80","description":"Screw-in resistance thermometer\/temperature sensor THERMASGARD® ETF 6 with neck tube, passive output, aluminum connection head and straight protection tube.\u003cbr\u003e\u003cbr\u003eThe duct sensor is used for temperature measurement in liquid or gaseous media. It is used in pipelines, containers or storage tanks - and preferably where pipes or containers need to be insulated.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254582706507,"sku":"1101-2070-1043-000","price":101.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RGTF-2__formB-HL_maxi-mL_4c_2cdb17ab-0ed8-4c2d-9fd0-bdaa196253bb.png?v=1769670483"},{"product_id":"mittelwerttemperaturfuehler-rutenfuehler-thermasgard-mwtf-pt1000-0-4m-kabelverschraubung-ip65-1101-3050-5081-000","title":"THERMASGARD® MWTF Pt1000 0.4m","description":"Mean value temperature sensor THERMASGARD® MWTF (rod sensor 0.4...20 m)\u003cbr\u003ewith passive output, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (fully active), copper protection tube with plastic coating and anti-kink spring, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTHERMASGARD® MWTF-SD mean value temperature sensor (rod sensor 3 m\/6 m) with passive output, in impact-resistant plastic housing with snap-on cover, with flexible sensor rod (fully active), protection tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange. \u003cbr\u003e\u003cbr\u003eThe temperature transmitters are used to detect the average temperature (mean value) in gaseous media, e.g. as duct temperature sensors in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, they detect the temperature evenly). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254599713099,"sku":"1101-3050-5081-000","price":109.43,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTF__tyr1-rute-gerade_maxi-mL_4c_ae079efe-3b47-4f1d-89f8-b3fb312b1f43.png?v=1769686382"},{"product_id":"mittelwerttemperaturfuehler-rutenfuehler-thermasgard-mwtf-pt1000-6m-kabelverschraubung-ip65-1101-3050-5261-000","title":"THERMASGARD® MWTF Pt1000 6m","description":"Mean value temperature sensor THERMASGARD® MWTF (rod sensor 0.4...20 m)\u003cbr\u003ewith passive output, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (fully active), copper protection tube with plastic coating and anti-kink spring, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTHERMASGARD® MWTF-SD mean value temperature sensor (rod sensor 3 m\/6 m) with passive output, in impact-resistant plastic housing with snap-on cover, with flexible sensor rod (fully active), protection tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange. \u003cbr\u003e\u003cbr\u003eThe temperature transmitters are used to detect the average temperature (mean value) in gaseous media, e.g. as duct temperature sensors in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, they detect the temperature evenly). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254600204619,"sku":"1101-3050-5261-000","price":240.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTF__tyr1_maxi-mL_4c_1f356d9c-d1f3-471d-9b36-13b594550905.png?v=1769686513"},{"product_id":"mittelwerttemperaturfuehler-rutenfuehler-thermasgard-mwtf-ni1000-6m-kabelverschraubung-ip65-1101-3050-9261-000","title":"THERMASGARD® MWTF Ni1000 6m","description":"Mean value temperature sensor THERMASGARD® MWTF (rod sensor 0.4...20 m)\u003cbr\u003ewith passive output, in impact-resistant plastic housing with quick-locking screws, with flexible sensor rod (fully active), copper protection tube with plastic coating and anti-kink spring, incl. mounting flange.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eTHERMASGARD® MWTF-SD mean value temperature sensor (rod sensor 3 m\/6 m) with passive output, in impact-resistant plastic housing with snap-on cover, with flexible sensor rod (fully active), protection tube made of reinforced thermoplastic hose and anti-kink spring, incl. mounting flange. \u003cbr\u003e\u003cbr\u003eThe temperature transmitters are used to detect the average temperature (mean value) in gaseous media, e.g. as duct temperature sensors in ventilation and air conditioning ducts over the entire cross-section or over a defined length (installed in a meandering pattern, they detect the temperature evenly). Mounting clamps MK-05-M (accessories) are available for professional installation of the rod.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254600794443,"sku":"1101-3050-9261-000","price":214.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/MWTF__tyr1_maxi-mL_4c_0a82f57d-e4aa-443c-a743-f2c7f511a059.png?v=1769686214"},{"product_id":"kanaltemperaturfuehler-rauchgastemperaturfuehler-thermasgard-rgtf1-pt1000-250mm-druckschraube-ip54-1101-3040-5051-000","title":"THERMASGARD® RGTF1 Pt1000 250mm","description":"Resistance thermometer\/flue gas temperature sensor THERMASGARD® RGTF 1 with passive output, optionally with cable gland or M12 plug connector to DIN EN 61076-2-101, with aluminum connection head and straight protective tube, incl. mounting flange. \u003cbr\u003e\u003cbr\u003eThe duct sensor is used to detect relatively high temperatures in gaseous media, e.g. for exhaust air and flue gas temperature measurement.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254602236235,"sku":"1101-3040-5051-000","price":198.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/RGTF-1__formB-MF_maxi-mL_4c_8642f571-e658-41aa-8bc5-91261c4c6ce1.png?v=1769684786"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf54-pt1000-100mm-kv-kabelverschraubung-ip65-1101-7070-5021-000","title":"THERMASGARD® TF54 Pt1000 100mm KV","description":"Resistance thermometer\/temperature sensor THERMASGARD® TF 54 with passive output, aluminum connection head and straight protection tube. One basic device in four variants by combining with accessories, e.g. for robust applications with separate stainless steel immersion sleeve.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The Kana sensor is used to measure temperatures in liquid or gaseous media. It is used in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil\/lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254616621387,"sku":"1101-7070-5021-000","price":85.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/FormB-KV__maxi-mL_4c_83b2f95e-366d-47bb-b781-95b300b747fa.png?v=1762955875"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf54-pt100-100mm-druckschraube-ip54-1101-7050-1023-000","title":"THERMASGARD® TF54 Pt100 100mm","description":"Resistance thermometer\/temperature sensor THERMASGARD® TF 54 with passive output, aluminum connection head and straight protection tube. One basic device in four variants through combination with accessories, e.g. for robust applications with separate stainless steel immersion sleeve.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The Kana sensor is used to measure temperatures in liquid or gaseous media. It is used in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil\/lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254630973771,"sku":"1101-7050-1023-000","price":75.01,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-54__formB_maxi-mL_4c_da2701e1-cc83-4c61-8fcb-91b6c8424c71.png?v=1762954266"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf54-pt100-150mm-druckschraube-ip54-1101-7050-1033-000","title":"THERMASGARD® TF54 Pt100 150mm","description":"Resistance thermometer\/temperature sensor THERMASGARD® TF 54 with passive output, aluminum connection head and straight protection tube. One basic device in four variants by combining with accessories, e.g. for robust applications with separate stainless steel immersion sleeve.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The Kana sensor is used to measure temperatures in liquid or gaseous media. It is used in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil\/lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254631268683,"sku":"1101-7050-1033-000","price":76.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-54__formB_maxi-mL_4c_105fcdf3-6c86-49bd-bc66-a4552863ebcf.png?v=1762954485"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf54-pt100-250mm-druckschraube-ip54-1101-7050-1053-000","title":"THERMASGARD® TF54 Pt100 250mm","description":"Resistance thermometer\/temperature sensor THERMASGARD® TF 54 with passive output, aluminum connection head and straight protection tube. One basic device in four variants through combination with accessories, e.g. for robust applications with separate stainless steel immersion sleeve.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e The Kana sensor is used to measure temperatures in liquid or gaseous media. It is used in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil\/lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254631629131,"sku":"1101-7050-1053-000","price":79.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-54__formB_maxi-mL_4c_cdea86ab-f151-4d65-89a3-0172dd133c98.png?v=1762954923"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf43-lm235z-100mm-kabelverschraubung-ip54-1101-7012-1021-000","title":"THERMASGARD® TF43 LM235Z 100mm","description":"\u003cp\u003eThe THERMASGARD® TF 43 is a resistance thermometer with passive output, housing made of impact-resistant plastic with snap-on cover and straight protection tube. THERMASGARD® TF 65 is a resistance thermometer with passive output, housing made of impact-resistant plastic, housing cover with quick-locking screws and straight protection tube. Patent no. DE 10 2012 017 500.0The built-in temperature sensor\/immersion temperature sensor is an electrical contact thermometer that is used to measure temperatures in liquids and gases and is installed in pipes and containers, for example. Stainless steel immersion sleeves must be used for aggressive media (see accessories). The temperature sensor is used, for example, in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil and lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.\u003c\/p\u003e","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254635200843,"sku":"1101-7012-1021-000","price":32.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-43__tyr01_maxi-mL_4c_01dbadb5-df81-4963-bd43-c2b093c18662.png?v=1762947053"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf43-lm235z-150mm-kabelverschraubung-ip54-1101-7012-1031-000","title":"THERMASGARD® TF43 LM235Z 150mm","description":"\u003cp\u003eThe THERMASGARD® TF 43 is a resistance thermometer with passive output, housing made of impact-resistant plastic with snap-on cover and straight protection tube. THERMASGARD® TF 65 is a resistance thermometer with passive output, housing made of impact-resistant plastic, housing cover with quick-locking screws and straight protection tube. Patent no. DE 10 2012 017 500.0The built-in temperature sensor\/immersion temperature sensor is an electrical contact thermometer that is used to measure temperatures in liquids and gases and is installed in pipes and containers, for example. Stainless steel immersion sleeves must be used for aggressive media (see accessories). The temperature sensor is used, for example, in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil and lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.\u003c\/p\u003e","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254635594059,"sku":"1101-7012-1031-000","price":34.13,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-43__tyr01_maxi-mL_4c_4130fda5-4335-4de4-a064-3b02b6571785.png?v=1762947112"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf43-lm235z-200mm-kabelverschraubung-ip54-1101-7012-1041-000","title":"THERMASGARD® TF43 LM235Z 200mm","description":"\u003cp\u003eThe THERMASGARD® TF 43 is a resistance thermometer with passive output, housing made of impact-resistant plastic with snap-on cover and straight protection tube. THERMASGARD® TF 65 is a resistance thermometer with passive output, housing made of impact-resistant plastic, housing cover with quick-locking screws and straight protection tube. Patent no. DE 10 2012 017 500.0The built-in temperature sensor\/immersion temperature sensor is an electrical contact thermometer that is used to measure temperatures in liquids and gases and is installed in pipes and containers, for example. Stainless steel immersion sleeves must be used for aggressive media (see accessories). The temperature sensor is used, for example, in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil and lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.\u003c\/p\u003e","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254635823435,"sku":"1101-7012-1041-000","price":34.92,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-43__tyr01_maxi-mL_4c_bac0e74f-5411-459c-9a7e-5f9d005c9136.png?v=1762947169"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf43-lm235z-300mm-kabelverschraubung-ip54-1101-7012-1061-000","title":"THERMASGARD® TF43 LM235Z 300mm","description":"\u003cp\u003eThe THERMASGARD® TF 43 is a resistance thermometer with passive output, housing made of impact-resistant plastic with snap-on cover and straight protection tube. THERMASGARD® TF 65 is a resistance thermometer with passive output, housing made of impact-resistant plastic, housing cover with quick-locking screws and straight protection tube. Patent no. DE 10 2012 017 500.0The built-in temperature sensor\/immersion temperature sensor is an electrical contact thermometer that is used to measure temperatures in liquids and gases and is installed in pipes and containers, for example. Stainless steel immersion sleeves must be used for aggressive media (see accessories). The temperature sensor is used, for example, in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil and lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.\u003c\/p\u003e","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254637232459,"sku":"1101-7012-1061-000","price":38.35,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-43__tyr01_maxi-mL_4c_7286e153-ea11-4bc0-98dc-3e2ba4b16624.png?v=1762947286"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf43-nitk-150mm-kabelverschraubung-ip54-1101-7011-0031-000","title":"THERMASGARD® TF43 NiTK 150mm","description":"\u003cp\u003eThe THERMASGARD® TF 43 is a resistance thermometer with passive output, housing made of impact-resistant plastic with snap-on cover and straight protection tube. THERMASGARD® TF 65 is a resistance thermometer with passive output, housing made of impact-resistant plastic, housing cover with quick-locking screws and straight protection tube. Patent no. DE 10 2012 017 500.0The built-in temperature sensor\/immersion temperature sensor is an electrical contact thermometer that is used to measure temperatures in liquids and gases and is installed in pipes and containers, for example. Stainless steel immersion sleeves must be used for aggressive media (see accessories). The temperature sensor is used, for example, in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil and lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.\u003c\/p\u003e","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254638510411,"sku":"1101-7011-0031-000","price":35.41,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-43__tyr01_maxi-mL_4c_6b983173-f1e6-4e99-ae89-9b958181be3f.png?v=1762948039"},{"product_id":"tauchtemperaturfuehler-thermasgard-tf43-ntc10k-50mm-kabelverschraubung-ip54-1101-7011-5011-000","title":"THERMASGARD® TF43 NTC10K 50mm","description":"\u003cp\u003eThe THERMASGARD® TF 43 is a resistance thermometer with passive output, housing made of impact-resistant plastic with snap-on cover and straight protection tube. THERMASGARD® TF 65 is a resistance thermometer with passive output, housing made of impact-resistant plastic, housing cover with quick-locking screws and straight protection tube. Patent no. DE 10 2012 017 500.0The built-in temperature sensor\/immersion temperature sensor is an electrical contact thermometer that is used to measure temperatures in liquids and gases and is installed in pipes and containers, for example. Stainless steel immersion sleeves must be used for aggressive media (see accessories). The temperature sensor is used, for example, in pipelines, in heating technology, in storage tanks, compact district heating stations, hot and cold water systems, oil and lubrication circulation systems, in machine, apparatus and plant construction as well as in the entire industrial sector.\u003c\/p\u003e","brand":"THERMASGARD","offers":[{"title":"Default Title","offer_id":51254642704715,"sku":"1101-7011-5011-000","price":31.19,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0861\/8626\/2859\/files\/TF-43__tyr01_maxi-mL_4c_64296618-af5d-4c66-95a6-d5cf1fcc7a19.png?v=1762949316"}],"url":"https:\/\/www.spluss.de\/en\/collections\/bestsellers.oembed","provider":"S+S Regeltechnik","version":"1.0","type":"link"}