- % SALE %
- Temperature
- Humidity
- Pressure
- Light Intensity & Motion
- Air Quality & Flow
- Modbus | Wireless Modbus
- PowerIO®
- EtherCAT P
- Accessory
Description
Outside temperature sensor / wet room temperature sensor
THERMASGARD® ATF 2
THERMASGARD® ATF 2 outside wall-mount resistance thermometre or weather sensor device (external sensor) with passive output, housing made of impact resistant plastic and quick-locking screws.
The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.
The measuring transducer serves to measure outside temperatures and temperatures in wet room and is used e.g. as an outdoor/weather sensor device for installation on outside walls, in cold storage buildings, greenhouses and halls, in the industrial sector and in agriculture. In outdoor areas, the temperature measuring transducer is installed preferably at the north side of a building or in a protected place.
In cases of direct solar irradiation, our SS 02 sunshade and ball-proof protection (accessory) or the device variant with installed SS 02 sunshade (available on request) should be used.
Technical details
Sensors output
sensor inside external sensor tube made of
stainless steel, 1.4571, V4A
stainless steel, 1.4571, V4A
Measuring range
–50...+90 °C
Insulating resistance
100 MΩ,
at +20 °C (500V DC)
at +20 °C (500V DC)
Electrical connection
0.14 - 1.5 mm²
via terminal screws on circuit board
via terminal screws on circuit board
Housing dimensions
72 x 64 x 37,8 mm (Tyr 1)
Cable gland
M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm
max. inner diameter 10.4 mm
Sensor
Pt1000, DIN EN 60751, class B
Connection type
2-wire connection
Permissible air humidity
< 95 % RH, non-precipitating air
Protection class
III (according to EN 60 730)
Protection type
IP 65 (according to EN 60 529)*
Testing current
< 0.6 mA
Optional
with sunshade SS 02 (available on request)
Cable connection
cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)
M12 connector according to DIN EN 61076-2-101 (optional on request)
Housing
plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)