Air flow monitor RHEASREG® KLGF 1

Item no. 1701-3120-1000-000

EAN 4251325613789

Product group: WG01

Air flow monitor RHEASREG® KLGF / KLSW

Electronic RHEASGARD® KLGF duct air flow transmitter with active output, in an impact resistant plastic housing, optionally with/without display, for determining flow velocity in m/s. The measuring transducer converts the measured value into a standard signal of 0-10 V.

ElectronicRHEASREG® KLSW duct air flow monitor with switching output (one-step or two-step relay), in a plastic housing, for determining flow velocity in m/s. Fine adjustment of the measuring range end value by the user is possible with the help of a potentiometer.

The flow sensor devices are suitable for monitoring or controlling airflow in ducts, at ventilators and dampers, for flow-dependent monitoring of humidifiers and electric heating registers according to DIN 57100, part 420, or for use in connection with DDC systems.

Voltage supply

24 V AC/ DC

Data points

flow velocity

Operating range

0.1...30 m/ s (adjustable)

Sensitivity

0.1...30 m/ s

Current consumption

approx. 3 VA

Measuring range

0.1...30 m/ s

Ambient temperature

0...+60 °C at the device; 0...+80 °C medium

Medium

pollutant-free, non-precipitating air

Switching hysteresis

2 % (permanently set)

Process connection

by mounting flange
(included in the scope of delivery)

Max. sensor cable length

50 m, avoid laying parallel with mains voltage-carrying lines,
or use shielded cables, minimum cross section 1.5 mm²
per conductor, apply cable screen one-sided

Protective tube

metal (brass, nickel-plated), Ø 10 mm,
nominal length NL = 140 mm

Electrical connection

0.25 - 2.5 mm²
via terminal screws

Cable connection

cable gland, plastic (M 16 x 1.5; with strain relief, exchangeable, max. inner diameter 10.4 mm) or
M12 connector according to DIN EN 61076-2-101 (optional on request)

Housing

plastic, UV-stabilised,
material polyamide, 30 % glass-globe reinforced,
with quick-locking screws
(slotted/ Phillips head - combination),
colour traffic white (similar to RAL 9016)

Screwed socket

Cable gland

M 16 x 1.5, including strain relief, exchangeable,
max. inner diameter 10.4 mm

Dimensions

72 x 64 x 37,8 mm (Tyr 1)

Protection class

III (according to EN 60 730) at UB = 24 V

Protection type

IP 65 (according to EN 60 529)*

Protection type housing

IP 65

Operating instructions